Garland US Range M48-23S Master Series Heavy Duty Range

This heavy-duty commercial gas range features two (2) open burners, a 23" griddle, and a storage cabinet in one unit. It has stainless steel front and sides to protect from rust, stain, or scratches. The griddle comes with three 33,000 BTU burners with thermostatic controls to provide you with the precision and flexibility you need for various breakfast and burger recipes. The steel plate is 1" thick for excellent heat retention that can speed up your cooking. The open burners deliver a total of 48,000 BTU and come with removable ring grates for thorough cleaning. This commercial range has a 7.5" stainless steel front rail perfect for plating or quick prep work. The unit sits on 6" chrome steel legs that can be adjusted to find the ideal working height.

This heavy-duty range comes with CSA Flame, CSA Star, and NSF certifications. 

Get the best restaurant and heavy-duty ranges and other commercial cooking equipment only here at CKitchen!

Standard Features: 

• Piezo Spark ignition for oven 
• Stainless steel front and side 
• Fully porcelainized oven interior
• Clip‑on stainless steel backsplash 
• One‑piece stainless steel drip tray 
• 6" (152mm) chrome steel adj. legs 
• 7-1/2" (191mm) stainless steel front rail 
• Removable ring grates over each burner 
• Removable front-mounted stainless steel grease receptacle 
• 2-5/16" (591mm) H welded steel splash guards, sides & back 
• 1" (25mm) thick steel griddle plate & two 33,000 BTU (9.67kW) “H” burners 
• 40,000 BTU (11.72kW) natural, 35,000 BTU (10.25kW) propane cast iron oven burner 
• Two 24,000 BTU (7kW) natural, 20,000BTU (5.86kW) propane Starfire burners per section. 
• Thermostatically controlled griddle, (450° F max.) on left with embedded capillary line sensors 

Optional Features: 

• Stainless main back 
• Additional oven rack 
• Stainless steel oven interior 
• Gas regulator 3/4" or 1-1/4" 
• End caps and cover (NC, specify) 
• Rear gas connection, 3/4" or 1" NPT 
• 6" (152mm) stainless steel adj. legs 
• Celsius dial for oven thermostat (NC)
• Dais base (not for use with “RC” oven) 
• Gas shut off valve; 3/4", 1" or 1-1/4" NPT 
• Fully grooved griddle (or grooved sections) 
• 230 volt, 50 cycle components, RC motor (export) 
• Storage base shelf of aluminized or stainless steel 
• Stainless steel tubular high shelf, single or double deck 
• Convection oven base, add C to model #, e.g. M48-23RC 
• Set of (4) Polyurethane non-marking swivel casters w/ front brakes 
• Stainless steel backguard: 10" (354mm), 17" (432mm) or 33" (838mm) 
• Stainless steel common front rail up to 102" (2591mm) wide (two or more units in a battery) 
• Gas flex hose & quick disconnect (3/4", 1" or 1-1/4" NPT x 5') w/restraining device, please specify 

Specifications: 
Heavy duty gas range, Model M48-23R with ovens with one 23" (548mm) wide x 25" (635mm) deep x 1" (25mm) thick griddle. Valve controlled griddle, bordered side and rear continuous welded stainless steel splash guards, 66,000 BTU (19.3kW) total, on left only, and two 24,000 BTU (7.0 kW) Starfire open burners with heavy duty cast iron top grates/ring grates. 34" (864mm) W x 38" (965mm) D, including 7-1/2" (191mm) deep stainless steel front rail. Porcelain enamel oven interior with 40,000 BTU (11.72kW) cast iron burner. Stainless steel front and sides. 154,000 BTU (45.10 kW) total (natural gas). Natural or propane gas. Also available with storage base with doors, M48- 23S, and with modular top, M48-23T. NOTE: Ranges supplied with casters must be installed with an approved restraining device