Garland US Range M45T Master Series Heavy Duty Range

The M45T heavy-duty modular commercial gas range with two (2) 18" front-fired hot tops can sit atop your equipment stand or work table. At just 9.5 inches tall without a stand, you can saute, simmer, and boil various foods right from your countertop. The stainless steel front and sides of this commercial range will help keep the pristine appearance and condition of the unit so you can use it longer.

The rings on the hot plates are made of cast iron and they are removable as well as the rings so maintenance can be performed with little to no difficulty. Three (3) jet-controlled burners with 11,000 BTU for propane and 15,000 BTU for natural gas supply heat to the hot tops so you can place multiple pots at the same time to cover a variety of cooking tasks you may require.  Add to that the 7.5" stainless steel front rail, which is perfectly durable and convenient for maneuvering pots and pans and plating.

Check out more high-quality restaurants and heavy-duty ranges and other commercial cooking equipment here at CKitchen!

• Modular top available
• Piezo spark ignition for oven 
• 7-1/2" stainless steel front rail
• Stainless steel front and sides
• 6" chrome steel adjustable legs
• 1‑piece Stainless Steel drip tray
• Fully porcelainized oven interior
• Removable cast iron ring and lid
• Storage base interior of aluminized steel w/ shelf
• Heavy gauge, aluminized steel radiation baffle system
• 40,000 BTU natural gas and 35,000 BTU propane gas cast iron oven burner
• Two 17" extra-heavy cast iron top sections, each with 3 individually controlled jet burners rated 45,000 BTU natural or 33,000 BTU propane total each section

• End caps and cover
• Additional oven racks
• Convection oven base
• Stainless steel main back
•  Stainless steel oven interior
• Gas regulator 3/4" or 1-1/4"
• 6" stainless steel adjustable legs
• Storage base shelf of stainless steel
• Celsius dial for oven thermostat (NC)
• Dais base (not for use with "RC" oven)
• Gas shut off valve; 3/4", 1" or 1-1/4" NPT
• Stainless steel backguard: 10", 17" or 33" 
• 230 volt, 50 cycle components, RC motor (export)
• Stainless steel tubular high shelf, single or double deck
• Set of (4) Polyurethane non-marking swivel casters w/ front brakes
• Stainless steel common front rail up to 102" wide (two or more units in a battery)
• Gas flex hose & quick disconnect (3/4", 1" or 1-1/4" NPT x 5') w/ restraining device
• Rear gas connection, 3/4" or 1-1/4" NPT; exterior mount, left or right, add 5-1/4" to range width