Garland US Range M47R Master Series Heavy Duty Range

Master Series Heavy Duty Range, gas, 34", griddle, individual Hi-Lo valve controls, standard oven, piezo ignition, stainless steel front & sides, 6" legs, 139,000 BTU, CSA Flame, CSA Star, NSF (Garland)

This heavy-duty commercial gas range packs a griddle and a standard oven in one convenient unit. It has stainless steel construction on the front and sides so it can keep up with busy foodservice operations. The griddle comes with three 33,000 BTU burners, which you can control individually via the Hi-Lo valve controls. The steel plate is 1" thick for excellent heat retention that can speed up your cooking.

The oven on this commercial range adds 40,000 BTU of cooking power so you can bake a wide array of dishes as well. The interior is porcelainized so grime and food debris should be easy to spot and clean off. It has a piezo spark ignition that fires up the oven in a snap. There is a 7.5" stainless steel front rail that you can use for additional plating or prep tasks. The entire unit is mounted on 6" adjustable chrome steel legs.

This heavy-duty range comes with CSA Flame, CSA Star, and NSF certifications. 

Get the best restaurant and heavy-duty ranges and other commercial cooking equipment only here at CKitchen!

• Modular top section 
• 6" chrome steel adj. legs
• 1" thick steel griddle plate
• Piezo spark ignition for oven
• 7-1/2" stainless steel front rail
• Stainless steel front and sides
• Fully porcelainized oven interior
• Clip‑on stainless steel backsplash
• Hi‑Lo valve control for each griddle burner
• Storage base interior of aluminized steel w/shelf
• Three “H” griddle burners 99,000 BTU (29 kW) total
• 2-5/16" high welded steel splash guard„ sides and back
• Removable front‑mounted stainless steel grease receptacle
• 40,000 BTU natural gas, 35,000 propane gas cast iron oven burner

• End caps and cover
• Additional oven rack
• 6" stainless steel adj. legs
• Stainless steel main back
• Gas regulator 3/4" or 1-1/4"
• Stainless steel oven interior
• Celsius dial for oven thermostat, NC
• Rear gas connection, 3/4" or 1" NPT
• Dais base (not for use with “RC” oven)
• Gas shut off valve; 3/4", 1" or 1-1/4" NPT
• Stainless steel backguard: 10", 17" or 33"
• Fully grooved griddle (or grooved sections)
• 230 volt, 50 cycle components, RC motor (export)
• Storage base shelf of aluminized or stainless steel
• Stainless steel tubular high shelf, single or double deck
• Convection oven base, add C to Model No., e.g. M47RC
• Set of (4) Polyurethane non‑marking swivel casters w/front brakes
• Stainless steel common front rail up to 102" wide (two or more units in a battery)
• Gas flex hose & quick disconnect (3/4", 1" or 1-1/4" NPT x 5') w/ restraining device