Garland US Range M46T Master Series Heavy Duty Range
Contact us for details
- Please see specification sheet for installation clearance requirements
- Additional required flue riser sold separately
Garland US Range M46T Specifications
BTU | 90,000 BTU |
---|---|
Number of Burners | 1 - 2 |
Total BTU | 16000 - 130000 |
Burner Style | Hot top |
Installation Type | Modular |
Range Base Style | Modular Base |
Brand | Garland/US Range |
Exterior Finish | Stainless Steel Front & Sides |
Base | Modular |
Gas Type | LP |
Heat | Gas |
Number of Ovens | None |
Range Configuration | Hot Top |
Width (in) | 34 |
Height (in) | 10 |
Depth (in) | 38 |
Weight | 270.00 |
Additional Information on Garland US Range M46T
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Garland US Range M46T Description
The M46T is a 34" wide modular heavy-duty commercial gas range from Garland's Master Series that can be used right from an equipment stand or a countertop. There are (2) 17" extra-heavy even-heat hot tops each equipped with a set of three (3) H-style burners to produce a total cooking power of 90,000 BTU. Designed to keep up with a busy kitchen, the stainless steel front and sides won’t easily rust or get dinged by pots and pans as staff comes and goes.
This commercial range is packing a heavy-gauge aluminized steel radiation baffle system and 1.5" seating flanges. The burners are individually controlled by a hi-lo control valve so you can cook more at the same time. When the food is hot and cooked, a 7.5" stainless steel front rail is there so you can assemble the dishes to perfection without wasting a second!
Check out more restaurant ad heavy-duty ranges and other commercial cooking equipment only here at CKitchen!
- Piezo spark ignition for oven
- Stainless steel front and sides
- Stainless steel burner box bottom
- 6" (152mm) chrome steel adj. legs
- 7‑1/2" (191mm) stainless steel front rail
- Storage base interior of aluminized steel
- Separate Hi-Lo control valves for each "H" burner
- Heavy gauge aluminized steel radiation baffle system
- 40,000 BTU (11.72 kW) natural gas, 35,000 BTU (10.25kW) propane gas cast iron oven burner
- Two extra heavy even heat cast iron hot top sections with 3 "H" burners; 90,000 BTU (26.4 kW) total
- Additional oven rack
- Stainless steel main back
- Gas regulator 3/4" or 1-1/4"
- Stainless steel oven interior
- End caps and cover, (NC, specify)
- 6" (152mm) stainless steel adj. legs
- Rear gas connection, 3/4" or 1" NPT
- Celsius dial for oven thermostat (NC)
- Dais base (not for use with “RC” oven)
- Gas shut off valve; 3/4", 1" or 1-1/4" NPT
- 230 volt, 50 cycle components, RC motor (export)
- Storage base shelf of aluminized or stainless steel
- Stainless steel tubular high shelf, single or double deck
- Convection oven base, add C to Model No., e.g. M46RC
- Set of (4) Polyurethane non-marking swivel casters w/front brakes
- Stainless steel backguard: 10" (354mm), 17" (432mm) or 33" (838mm)
- Stainless steel common front rail up to 102" (2591mm) wide (2 or more units in a battery)
- Gas flex hose & quick disconnect (3/4", 1" or 1-1/4" NPT x 5') w/ restraining device, please specify
Heavy duty gas range with oven, Model M46R. Two (2) 17" (432mm) even heat hot tops, rated a total 90,000 BTU (26.37 kW) total. 34" (864mm) wide x 38" (965mm) deep, including 7-1/2" (191mm) deep stainless steel front rail. Porcelain enamel oven interior with 40,000 BTU (11.72 kW) cast iron oven burner. Stainless steel front and sides. 130,000 BTU (38.09 kW) total. Natural or propane gas. Also available with storage base w/ doors, suffix S, and modular top, suffix T. NOTE: Ranges supplied with casters must be installed with an approved restraining device.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Garland US Range M46T Accessories
Garland US Range M46T Reviews
There are no reviews yet for this product.