FWE / Food Warming Equipment Co., Inc. MT-1220-6-6 Solid Door Mobile Heated Holding Cabinet, 120 Volts
FWE MT-1220-6-6 Specifications
Size | Full Height |
---|---|
Cabinet Type | Heated Cabinets |
Type | Holding Cabinets |
Interior Construction | Shelves |
Insulated | Yes |
Brand | FWE / Food Warming Equipment Co., Inc. |
Certifications | cULus |
Control Type | Thermostatic |
Door Type | Solid |
Style | Mobile |
Voltage | 120 Volts |
Width (in) | 21.5 |
Height (in) | 63.5 |
Depth (in) | 26.5 |
Weight | 265.00 |
Additional Information on FWE MT-1220-6-6
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
FWE MT-1220-6-6 Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
FWE MT-1220-6-6 Description
The MT-1220-6-6 Solid Door Mobile Heated Holding Cabinet from FWE is a mobile holding cabinet that allows users to fine-tune the temperature and humidity to provide their food with the best conditions allowing for maximum holding time while maintaining flavor and texture. To provide storage options this cabinet has removable fixed racks with 2-⅝” spacing designed to hold 12”x20” pans.
The controls are recessed and at eye-level to keep them out of the way while being easy to check the thermometer at a glance. The full-range thermostat has 10-degree increments to adjust the temperature between 90° and 190°F. The moisture control system ranges from moist to crisp to get the desired results. Two separate Incoloy nickel-chromium heating elements generate heat for the holding temperature and humidity. An easy to clean removable stainless steel water reservoir measuring 12”x20” provides water for moisture control. Warm air and moisture are circulated around the cabinet by a self-lubricated Hi-Temp blower motor that’s fan-cooled.
For ease of use, while providing a low profile design, the door is easy to open with a magnetic workflow door handle. Heat is locked into the cabinet by an insulated stainless steel door. For an air-tight seal, a cabinet-mounted door seal is included.
The cabinet features a tough 20 gauge stainless steel exterior with an easy to wipe-down polished finish. The interior features 22 gauge stainless steel construction with coved corners to make cleaning a breeze. High-density UG-26 fiberglass insulation in the sides, top, bottom, and sides help maintain the temperature with minimal power. To make this holding cabinet easy to move it rolls on 50” polyurethane casters.
This holding cabinet features IPX4 and CE certification as well as being listed by UL and classified by UL EPH; making sure it’s made to the highest safety and sanitation standards.
Standard Features:
- Field reversible door - flexible installation options for kitchen layout
- Magnetic work flow door handle - ergonomically accomodates kitchen staff and servers at varying heights
- Removable humidity pan: 12″ x 20″ pan provides large water reservoir - removable, easy to clean and replaceable
- Easy to use - upfront and recessed electronic control panel has separate, easy to read and set, air moisture and air temperature controls
- Built-in humidity system balances moisture and air with controlled heat and humidity capabilities - allows for greater control of holding food environment for longer holding periods
- Constructed of stainless steel, with welded base frame for added strength and durability - fully insulated cabinet and door provide energy efficient heating and longer holding times
- MT-1220 series accommodates shallow and deep 12″ x 20″ pans, 18″ x 13″ trays and GN1/1 containers. Unique pan slide racks’ front edges are relieved for easy loading, one piece die stamped stainless steel for extra strength, and removable for easy cleaning
- ELECTRICAL
- Timer
- Element upgrade
- 220 volt, 50/60 Hz single phase
- DOORS
- Glass doors
- Dutch doors
- Paddle latch
- See-thru Lexan door
- Key locking door latch
- Left hand door hinging
- SPACINGS
- Shelves
- Custom pan slide spacings
- CASTERS
- All swivel or larger casters
- EXTRAS
- Security packages
- Cord winder bracket
- Full extension bumper
- Heavy-duty push/pull handles
- Top corner bumpers (set of 4)
FWE MT-1220-6-6 Reviews
There are no reviews yet for this product.