Everest Refrigeration EBD4-SS 4 Taps 1/2 Barrel Draft Beer Cooler - Stainless Steel, 4 Kegs Capacity, 115 Volts
MPN#: EBD4-SS
1/2
Free Freight?
Quick Ship
$4,501.00
Log In or Call for The Price
Product Protection
Starting at
- 2023 model, meets the newest EPA and DOE codes.
Everest Refrigeration EBD4-SS Specifications
Number of Kegs | 4 Kegs |
---|---|
Number of Taps | 4 Taps |
Installation Type | Built-In |
Construction | Stainless and Galvanized Steel |
Brand | Everest Refrigeration |
Refrigerant Type | R-290 |
Certifications | 5-15P |
Type | Beer Dispensers |
Exterior Finish | Stainless Steel |
Style | 1/2 Barrel |
Voltage | 115 Volts |
Width (in) | 89.25 |
Height (in) | 52.38 |
Depth (in) | 27 |
Weight | 405.00 |
Additional Information on Everest Refrigeration EBD4-SS
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Everest Refrigeration EBD4-SS Certifications
5-15P
Two-pole with ground pin plug
ETL
The ETL Mark is proof of product compliance to North American safety standards.
ETL-Sanitation
This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Everest Refrigeration EBD4-SS Description
Direct Direct Draw Keg Refrigerator, three-section, 89-1/4"W, 32.0 cu. ft. capacity, (3) solid hinged doors (locking), snap-in magnetic door gasket, holds (4) 1/2 barrel kegs, (2) 3" diameter insulated stainless steel draft towers (NSF) with air distributor, (2) faucets per tower, digital controls with LED display, +33°F to +54°F temperature range, auto defrost, LED interior lighting, overheat protection alarm for compressor & condenser coil, stainless exterior, galvanized steel interior, self-contained side mounted refrigeration, exterior drain port for excess top tray moisture, drain hose not included, floor drain required, R290 Hydrocarbon refrigerant, 1,907 BTU/hr, 1/3 HP, 115v/60/1-ph, 2.5 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-SanitationStandard Features:
Refrigeration System
- Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
- Full-length air duct system ensures optimal circulation of cold air.
- Large capacity, corrosion-resistant condenser and evaporator coils.
- Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
- Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
- Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
- High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
- Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
Cabinet Construction
- Heavy duty stainless steel exterior.
- Built-in caster thread receptacles for all models.
- 1 3/4" thick high density polyurethane insulation.
- Open spaced interior with no walls between compartments.
Lighting
- Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
Doors
- High strength, recessed door handles.
- Stainless steel exterior and galvanized interior.
- 1 3/4" thick high density polyurethane insulation.
- Pre-installed door locks keep your items safe from theft.
- Snap-in magnetic door gasket make cleaning and replacement an easy process.
Draft Arms
- Two dual faucet, 3" diameter, stainless steel draft arms with matching air distributors. Fully insulated and NSF certified.
Temperature Control
- Multi-function digital controller with easy to read LED display.
- Audible overheat protection alarm for compressor and condenser coil.
- Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
Options
- 3” or 5” swivel casters with locks.
- 3.5” - 6” height-adjustable and interchangeable legs.
- Dual or triple faucet draft arms and matching air distributors.
Everest Refrigeration EBD4-SS Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Everest Refrigeration EBD4-SS to Other Products
Rating
Price
Width (in)
Depth (in)
Exterior Finish
Height (in)
Number of Taps
Number of Kegs
Style
Voltage
Certifications
Price
$4,501.00 89.25
27
Stainless Steel
52.38
4 Taps
4 Kegs
1/2 Barrel
115 Volts
5-15P
Price
$4,375.00 58.88
27.13
Black
38.5
2 Taps
2 Kegs
1/2 Barrel
115 Volts
5-15P
Price
$4,596.21 73.13
24.4
Black
56.94
4 Taps
3 Kegs
1/2 Barrel
115 Volts
5-15P
Price
$4,751.00 59.50
29.00
Stainless Steel
36.88
3 Taps
2 Kegs
1/2 Barrel
115 Volts
5-15P
Price
$5,026.71 59
29
Stainless Steel
52.5
2 Taps
3 Kegs
1/2 Barrel
115 Volts
cULus
Price
$4,839.00 80.00
29.00
Black
36.88
4 Taps
4 Kegs
1/2 Barrel
115 Volts
5-15P
Items Related to Everest Refrigeration EBD4-SS
Beer Dispensing Tower Heads 1012 products
Glass Chillers and Frosters 92 products
Bar Equipment & Supply 1105 products
Commercial Beer Dispensers 291 products