Beverage Air SPED72HC-12C-2 72'' 2 Door 2 Drawer Counter Height Refrigerated Sandwich / Salad Prep Table with Cutting Top
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air SPED72HC-12C-2 Specifications
Nominal Width | 72 Inches |
---|---|
Top Type | Cutting Top |
Access Type | Doors and Drawers |
Compressor Style | Side / Rear Breathing |
Construction | Stainless and Galvanized Steel |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Made in | USA |
Certifications | cULus |
Number of Doors | 2 |
Capacity | 19 - 32 cu. ft. |
Number of Drawers | 2 |
Sections | 3 |
Style | Counter Height |
Voltage | 115 Volts |
Width (in) | 72 |
Height (in) | 45.13 |
Depth (in) | 38.38 |
Weight | 418.00 |
Additional Information on Beverage Air SPED72HC-12C-2
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air SPED72HC-12C-2 Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air SPED72HC-12C-2 Description
If you're looking for a full-size refrigerated prep table then the SPED72HC-12C-2 Elite Series™ Sandwich Top Refrigerated Counter from Beverage Air is an obvious choice. Below the worktop, the two drawers and two reach-in sections provide a total of 20.0 cu. ft. of refrigerated space. Pans up to 6" deep can be stored in the drawers for more versatility while the reach-in sections come with sturdy epoxy-coated steel wire shelves to organize larger items.
The worktop features a refrigerated bunker with a dozen ⅙-size pans for prepped items. A 17” deep extended cutting board runs the full width of the prep table providing more than enough room to work on salads, sandwiches and prep ingredients.
The reach-in cabinet has two epoxy-coated steel wire shelves to make the best use of the space. The liner is made from corrosion-resistant aluminum that is easy to clean and maintain. The stainless steel door locks in the cold air with snap-in gaskets that can be removed easily for maintenance or cleaning. The interior is kept nice and cold by enhanced airflow which keeps the temperature between 36º and 38ºF.
The drawers feature slides with a locking mechanism to prevent them from being pulled out of the cabinet accidentally. Stainless steel frames are used to support the telescoping drawer slides for effortless access to ingredients.
At the bottom of the unit is the refrigeration system, this bottom-mounted design saves space and provides efficient cooling. The self-contained refrigeration system has a ⅓ HP compressor that provides 1549 BTU/hr of cooling with hydrocarbon-based R290 refrigerant which is compliant to all modern environmental codes. The refrigeration system features full electronic control to efficiently control the temperature and a condensate evaporator that eliminates the need for a floor drain.
This unit is configured to use standard 115v/60/1-ph power at 5.4 amps. An 8’ power cable with an integrated NEMA 5-15P plug comes standard.
Beverage Air SPED72HC-12C-2 Accessories
Beverage Air SPED72HC-12C-2 Reviews
There are no reviews yet for this product.