Beverage Air SPED72HC-10C-2 72'' 2 Door 2 Drawer Counter Height Refrigerated Sandwich / Salad Prep Table with Cutting Top

Beverage Air SPED72HC-10C-2 Description

Sandwich Top Refrigerated Counter, three-section, 72"W, 20.0 cu. ft. capacity, (2) drawers (upper & lower pull-out drawers accommodate 6" deep pans), (2) doors, (4) shelves, stainless steel top with opening for (10) 1/6 size pans (pans furnished are 4" deep, tops will accommodate 6" deep pans), 17" polyethylene cutting board, stainless steel exterior with galvanized steel back & bottom, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

The Beverage Air SPED72HC-10C-2 Elite Series™ Sandwich Top Refrigerated Counter is a prep table configured with two reach-in sections and two refrigerated drawers for convenient storage of larger items while ten 1/6 pans on the countertop provide easy access for effortless sandwich or salad prep work. With 20.0 cu. ft. of refrigerated space in the drawers and reach-in section, plenty of additional ingredients can be stored safely. The drawers are designed to hold 6" deep pans if larger amounts of a prep ingredient need to be easy to access and the reach-in sections come with epoxy-coated wire shelves to maximize the use of space.

The liner of the reach-in cabinets are made from corrosion-resistant aluminum which is easy to clean. The stainless steel doors lock in cold air with snap-in gaskets that are easy to remove for maintenance or cleaning. The interior of the reach-in sections is subjected to enhanced airflow which keeps the temperature between 36º and 38ºF to maximize shelf-life.

The worktop consists of a cutting board that runs the full width of the unit providing plenty of space to do prep work. The cutting board is easily removed for cleaning. The refrigerated pan storage area does not run the full width of the work area providing space for sauces and ingredients that don’t need refrigeration. The pans included with this refrigerated counter are made from durable, easy-to-clean white polyethylene plastic.

The drawers feature slides with a locking mechanism to prevent them from being pulled out of the cabinet accidentally. Stainless steel frames are used to support the telescoping drawer slides for effortless access to ingredients. The temperature inside the drawers is constantly maintained between 36º and 38ºF to keep food as fresh as possible.

The self-contained refrigeration system at the bottom of this prep counter has an efficient 1/3 HP compressor with 1549 BTU/hr of cooling capacity. Cooling is efficiently provided with eco-friendly R290 hydrocarbon refrigerant that meets all environmental regulations. Automatic defrosting is provided with a non-electric system.

This unit is configured to use standard 115v/60/1-ph power at 5.4 amps. An 8’ power cable with an integrated NEMA 5-15P plug comes standard.

The spacious Beverage Air SPED72HC-10C-2 Elite Series? Sandwich Top Refrigerated Counter provides you with more than enough room to prep food items. This worktable is 41.69 inches tall, 72 inches wide, and 36 inches deep.