Beverage Air SPE36HC-12M 36'' 2 Door Counter Height Mega Top Refrigerated Sandwich / Salad Prep Table

Beverage Air SPE36HC-12M Description

Mega Top Refrigerated Counter, two-section, 36"W, 10.01 cu. ft., (2) doors, (4) epoxy-coated wire shelves (2 per door), stainless steel top with opening for (12) 1/6 size pans, 10" cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4" deep, tops will accommodate 6" deep pans) R290 Hydrocarbon refrigerant, 1/6 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

The SPE36HC-12M Elite Series™ Mega Top Refrigerated Counter from Beverage Air is a refrigerator and prep table rolled into one convenient station for prepping sandwiches or salads. This unit comes with a refrigerated ingredient and condiment pan area that holds a dozen ⅙ pans that are 4” deep. The refrigerators below the worktop offer a total of 10.01 cu. ft. of cool storage on four epoxy-coated wire shelves.

The worktop consists of a cutting board that runs the full width of the unit providing plenty of space to do prep work. The cutting board is easily removed for cleaning. The pans included with this refrigerated counter are made from durable, easy-to-clean white polyethylene plastic.

The reach-in refrigerator sections below the worktop each have 2 epoxy-coated wire shelves to maximize the usable space while making organizing items much simpler. The interiors of these refrigerated sections are made from durable and corrosion-resistant aluminum which is easy to clean. Self-closing doors make sure that a temperature between 36º and 38ºF is easy to maintain as efficiently as possible. However, for convenience, the doors will remain open when opened to 120˚. The doors feature snap-in door gaskets that are easy to clean and maintain.

The refrigeration system installed at the bottom of this refrigerated counter uses environmentally-friendly R290 refrigerant which is hydrocarbon-based. An efficient ⅙ HP compressor providing 1140BTU/hr of cooling makes sure everything stays nice and cool. For convenience, this unit has an automatic defrost system which is non-electric.

This unit ships from the factory with an 8’ power cable that terminates in a 5-15P plug to connect it to a standard 115v/60/1-ph power outlet.

The top-notch Beverage Air SPE36HC-12M Elite Series? Mega Top Refrigerated Counter provides you with ample space to prep chilled food items. This worktable is 45.56 inches tall, 36 inches wide, and 38.31 inches deep.

• SPE36 Elite Series - Mega Top
  • Fifty percent greater pan capacity than the all around standard prep table. 
  • Features enhanced refrigeration system and new and improved grille system for better airflow and less temperature gradient.
  • Improved design provides better airflow management and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket. 
  • Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.
• Cabinet Construction
  • Cabinet back and bottom are constructed of galvanized steel. 
  • Pans furnished are 4” deep and made of polycarbonate plastic.
  • Interior liner is made of aluminum for superior resistance to corrosion.
  • Two epoxy-coated steel wire shelves per section are supplied as standard. 
  • A plug in type vinyl magnetic gasket is attached to each door for positive seal. 
  • Six-inch casters, 2 with brakes, are standard. Legs are available as an option.
  • Removable hoods and insulated lid assemblies are made of matching stainless steel. 
  • Cabinet insulation is CFC free foamed-in-place polyurethane of two-inch minimum thickness. 
  • Exterior construction includes heavy-duty stainless steel finish on front, sides, top, door(s) and grille. 
  • Cutting board supplied with cabinet is 10” wide constructed of high-density white polyethylene plastic. It is readily removable for cleaning.
  • Door handle is made from extruded aluminum with a black anodized finish. It is contoured to permit easy opening of doors with fingers from both top and bottom of handle.
  • Doors are mounted to face of cabinet on cartridge style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. 
• Refrigeration System
  • More robust refrigeration system provides added capacity and efficiency.
  • Automatic condensate evaporator is provided to eliminate the need of floor drains. 
  • Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. 
  • Forced air over the condenser is drawn through grille under door as well as the back and bottom of cabinet. 
  • Systems are designed using CFC free R134a refrigerant and capillary tube between condenser and evaporator. 
• Electrical Connection
  • Units pre-wired at factory and include 8’ long cord and plug.