Beverage Air SPE27HC-12M 27'' 1 Door Counter Height Mega Top Refrigerated Sandwich / Salad Prep Table

Beverage Air SPE27HC-12M Description

Mega Top Refrigerated Counter, one-section, 27"W, 6.76 cu. ft., (1) door, stainless steel top with opening for (9) 1/6 & (3) 1/9 size pans, removable 10" cutting board, (2) epoxy-coated wire shelves, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4" deep, tops will accommodate 6" deep pans), 6" casters (2 with brakes), R290 Hydrocarbon refrigerant, 1/10 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

The Beverage Air SPE27HC-12M Elite Series™ Mega Top Refrigerated Counter is a semi-mobile unit that provides refrigerated storage for sandwich ingredients in nine 4” deep ⅙ pans and three 1/9 pans that are 4” deep. This refrigerated counter also has a reach-in section with 6.76 cu. ft. of space.  The included casters make it easy to move this unit around to where it is needed and provides an easy to organize workspace for convenient sandwich prep.

The reach-in section features a corrosion-resistant aluminum liner that is easy to clean and two epoxy-coated steel wire shelves for the organization of items. The door is self-closing, but for easy access to multiple items, it can be opened past 120º to stay open. This combines the convenience of accessing multiple items with both hands when necessary while automatically closing when used quickly to make sure the temperature of 36ºF to 38ºF is achieved as efficiently as possible. 

The worktop of this refrigerated counter features a built-in extra deep cutting board that runs the full width of the unit providing more than enough space for sandwich prep. The twelve pans for ingredients and condiments are kept between 41ºF and 33ºF to keep everything as fresh as possible. This temperature is maintained with proper airflow to ensure shelf-life.

The unit is primarily constructed from stainless steel, which includes the top, front, sides, door, grill, lid, and hood while the back and bottom are made from durable and cost-effective galvanized steel. The refrigeration system at the base of the unit includes a ⅙ HP compressor unit that provides 1140 BTU/hr of cooling with environmentally-friendly R290 refrigerant. An Epoxy-coated evaporator coil makes sure the unit will provide efficient cooling for many years to come. The unit uses full electronic control and has an automatic non-electric defrost system for reduced downtime. 

This unit uses standard 115v/60/1-ph power at 2.0 amps, an eight-foot power cable comes standard with an integrated NEMA 5-15P plug.

The Beverage Air SPE27HC-12M Elite Series? Mega Top Refrigerated Counter is fully equipped with cooling technologies, allowing you to keep items fresh and cold while you work. This worktable is 45.50 inches tall, 27 inches wide, and 38.38 inches deep.

• SPE27 Elite Series - Mega Top
  • Fifty percent greater pan capacity than the all around standard prep table. 
  • Features enhanced refrigeration system and new and improved grille system for better airflow and less temperature gradient.
  • Improved design provides better airflow management and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket. 
  • Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses. 
• Cabinet Construction
  • Cabinet back and bottom are constructed of galvanized steel. 
  • Pans furnished are 4” deep and made of polycarbonate plastic.
  • Interior liner is made of aluminum for superior resistance to corrosion.
  • A plug in type vinyl magnetic gasket is attached to each door for positive seal. 
  • Six-inch casters, 2 with brakes, are standard. Legs are available as an option.
  • Removable hoods and insulated lid assemblies are made of matching stainless steel. 
  • Cabinet insulation is CFC free foamed-in-place polyurethane of two-inch minimum thickness. 
  • Exterior construction includes heavy-duty stainless steel finish on front, sides, top, door(s) and grille. 
  • Door handle is made from extruded aluminum with a black anodized finish. It is contoured to permit easy opening of doors with fingers from both top and bottom of handle.
  • Cutting board supplied with cabinet is 17” wide constructed of high-density white polyethylene plastic. It is readily removable for cleaning. Two epoxy-coated steel wire shelves are supplied as standard. 
  • Doors are mounted to face of cabinet on cartridge style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. 
• Refrigeration System
  • More robust refrigeration system provides added capacity and efficiency.
  • Automatic condensate evaporator is provided to eliminate the need of floor drains. 
  • Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. 
  • Forced air over the condenser is drawn through grille under door as well as the back and bottom of cabinet. 
  • Systems are designed using CFC free R134a refrigerant and capillary tube between condenser and evaporator. 
• Electrical Connection
  • Units pre-wired at factory and include 8’ long cord and plug.