Vulcan 3VK45AF PowerFry5™ (3) 45-50 lb. Fryers Gas Floor Fryer with Solid State Controls and KleenScreen PLUS® Filtration System, 120 Volts - 210,000 BTU
Chat Now
Vulcan 3VK45AF Specifications
Filtration System | KleenScreen PLUS® Filtration System |
---|---|
Series | PowerFry5™ |
Control Type | Solid State |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Battery | 3 |
Basket | Twin |
Basket Lifts | No |
BTU | 210,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Solid State |
Capacity | (3) 45-50 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 46.5 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 717.00 |
Additional Information on Vulcan 3VK45AF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 3VK45AF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 3VK45AF Description
If your kitchen needs a triple fryer system with Commercial Deep Fryers that each hold 45-50 lbs of oil the Vulcan 3VK45AF PowerFry5™ Fryer is an easy pick. This gas-heated fryer system is extremely efficient and features a filtration system that keeps running costs low for the lifetime of the unit. These deep fryers are ENERGYSTAR® qualified and some of the most energy-efficient models you can find on the market. The variety of Floor Model Gas Fryers offered by Vulcan are designed from the ground up to provide operators with a wide range of options to best fit their needs.
Gas-fired deep fryers have essentially used the same technology for the better part of a century, multiple burners each in their own heat exchange tube to apply heat to oil and expel the burned gas after a single pass. Vulcan’s FivePass™, as its name implies, uses a single large burner and two sets of heat exchange tubes with multiple bends to let the heat transfer to the oil evenly over five passes. This extracts as much heat from the burned gas as possible before it exits the fryer. This fryer has a cooking efficiency of 68% and 78% thermal efficiency, making it much more effective at transferring heat energy from combustion to actually usable cooking heat than other fryers on the market. This efficiency is evident in the fact that this fryer only uses 4,251 BTU/hr to maintain the cooking temperature when idle and thanks to the SoftStart™ ignition system only 35,000 BTU/hr is used to gradually heat the oil at startup which will extend its life.
To control the frying temperature a solid state analog knob behind the door allows users to set temperatures between 200° and 390°F. For ease of use, this fryer has an electronic ignition and selectable fat melt modes.
The built-in filtration system in this fryer system features an 18 gauge stainless steel filter vessel with the KleenScreen PLUS® filtration system that utilizes a stainless steel mesh to remove larger particles. For more thorough filtration removing particles larger than .5 microns, optional KleenScreen PLUS® envelopes can be used. To make sure filtration is done as quickly as possible oil is circulated at a rate of 8 GPM by a ⅓ HP pump motor.
This fryer is designed to stand up to the rigors of daily commercial use with a stainless steel cabinet and fry tank. The fryer is easy to keep level thanks to the adjustable 6” casters which are handy for cleaning and maintenance tasks. Other equipment supplied with this fryer include twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod.
The total gas input required by this fryer is 210,000 BTU/hr and it comes with a NEMA 5-15P cord and plug to connect it to a 120v outlet.
Standard Features:
- Hi-limit shut-off.
- 70,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,251 BTU/hr. to save energy.
- Stainless steel fry tank, 45 - 50 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency. ENERGY STAR® certified.
- FRYMATE-VX15 add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 6 1⁄2"w x 13 1⁄4"d x 6"h.
- Single large basket - 13"w x 13 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
45 - 50 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK45A) (1VK45D) (1VK45C). 70,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,251 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 3VK45AF Accessories
Vulcan 3VK45AF Reviews
There are no reviews yet for this product.