Nor-Lake KODB68-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Outdoor +35°F Cooler, 6' x 8' x 6'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, membrane roof, CPB050PC-E-0, R290 Capsule Pak ECO Refrigeration, 115v/60/1-ph

To reliably store refrigerated goods in bulk when you’ve run out of indoor floor space an outdoor walk-in cooler like the KODB68-C 6' x 8' x 6'-7" H Kold Locker from NorLake is your best option. The 231 cu. ft. interior of this walk-in coolers with top mounted compressor provides users with refrigerated storage options.

To keep the heat out, each panel is 4” thick. Each panel is constructed with 26 gauge steel coated with a corrosion-resistant embossed stucco finish. Inside each panel, foamed-in-place polyurethane insulation fills in all the gaps. Kold Locker walk-in units are easy to assemble, each panel has male and female mating rails that make alignment easy while foamed-in-place cam locking fasteners lock the panels together for an airtight seal. The corners feature panel gaskets that go around the exterior perimeter continuously without any breaks or cuts. 800 lbs per square foot can be supported by the floor panels. The floor panels are constructed in a similar fashion to the wall panels but use rustproof aluminum instead of steel. Floor and ceiling panels use foamed-in-place edge caps that will keep everything secure for the life of the walk-in.

The standard door is 26” wide with a  stepped profile to provide a barrier to airflow for an energy-efficient door. Usually upgrading the door with the wider 30” kit that comes with a stainless steel kick plate costs $250 but through CKitchen.com this upgrade is free. Two cam-lift hinges allow the door to open and close smoothly, they are field adjustable to compensate for any settling over the years to make sure the door always opens and closes smoothly while maintaining a proper seal. The door can be ordered hinged on the left or right to best fit your needs. A spring-loaded door closer makes sure the door is never left ajar. 

The door is pre-hung in a 4-foot wide panel and features a magnetic stainless steel trim, digital thermometer, replaceable perimeter heating wire, and vapor proof LED light fixture actuated by a switch with external indicator light. Everything inside the walk-in is kept secure by an NL 9800 deadbolt handle with an independent key/padlock feature. To keep workers safe, a safety release inside the door panel makes sure no-one gets locked inside.

To efficiently maintain temperatures between 35°F and 38°F this walk-in unit has a ceiling-mounted RCPB050JC-S-0-EV Capsule Pak Refrigeration system that produces 4060 BTU/hr of cooling. Adjusting the temperature inside is made simple by the Enviro-Control™ electronic controller system. This is also used for manual defrost and setting an automatic defrost timer. To protect this outdoor model from the elements, Nor-Lake includes a white 35 mill membrane roof material that doesn’t require gluing or seaming. The membrane roof is held in place with metal trim to flash it to the side of the unit secured by self-drilling/tapping TEK screws.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)