Nor-Lake KLB87810-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Indoor +35°F Cooler, 8' x 10' x 8'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, CPB075PC-S-0, R290 Capsule Pak Refrigeration, 115v/60/1-ph

For businesses that need a large amount of refrigerated space a walk-in unit like the KLB87810-C 8' x 10' x 8'-7" H Kold Locker from Nor-Lake is the go-to option. This walk-in unit has a height of 8’7” for extra vertical space.

The panels that make up this walk-in unit are 4” thick with foamed-in-place polyurethane insulation to keep the heat out. Each side of the panel has 26 gauge corrosion-resistant stucco embossed coated steel. To make assembly simple, each panel has female and male rails that overlap each other for a mechanically air-tight design. Foamed-in-place cam locking fasteners make sure that panels lock together tightly for a truly air-tight seal. The corners are protected by a continuous panel gasket that goes around the outer perimeter without any cuts or breaks. The ceiling panels feature foamed-in-place edge caps that will stay in place for the life of the cooler.

The door that ships standard with this walk-in unit is 26” wide and comes with a stepped profile providing a barrier against airflow. At no extra cost, the door can be replaced with a 30” wide one that comes complete with a stainless steel kick plate. This door comes with two hinges both of which are cam-lift and adjustable. This allows the door to be easily adjusted over the lifetime of the walk-in as it settles. The door also comes with a spring-assisted door closer to make sure it’s never left ajar. The 4-foot wide door panel comes with the door pre-hung and includes a vapor-proof LED lighting fixture activated by a switch connected to an external indicator light, replaceable heating wire, stainless steel trim, and a digital thermometer. To keep items inside secure, an NL 9800 deadbolt handle is included with an independent key/padlock feature. To prevent lock-ins there is a safety release inside.

The interior temperature is efficiently maintained between 35°F and 38°F by the RCPB075JC-S-4-EV Capsule Pak Refrigeration System in the ceiling that produces 6250 BTU/hr of heat rejection. The Capsule Pak unit comes with the Enviro-Control™ electronic control system to adjust the temperature and set the timing for automatic defrosting. An automatic condensate vaporizer is shipped loose and wired in the field removing the need for a drain line.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)