Nor-Lake KLF77812-C 8' x 12' x 7'-7" H Kold Locker Indoor Freezer with floor

Kold Locker™, Indoor -10°F Freezer, 8' x 12' x 7'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, CPF150JC-S-4-EV, R449 Capsule Pak Refrigeration, 208-230v/60/1-ph

If your operations need to handle frozen items in bulk, an indoor walk-in freezer like the KLF77812-C 8' x 12' x 7'-7" H Kold Locker from NorLake is a great option for its capacity and convenience. The 574 cu. ft. interior of this commercial walk-in freezer provides users with refrigerated storage options.

Each panel is 4” thick and features EPA-compliant foamed-in-place polyurethane insulation. The panels feature 26 gauge steel construction with embossed stucco and a corrosion-resistant coating. Assembling a Kold Locker walk-in is simple with each panel featuring female and male rails that mate together. Once mated together the panels are fully tightened with foamed-in-place cam locks which assure an airtight connection. The corners are kept sealed with panel gaskets that go around the outer perimeter without any breaks or cuts. The edge caps on the ceiling and floor panels are not overlapped or mechanically fastened, instead, they are foamed-in-place so they don’t come loose.

This walk-in unit comes standard with a 26” wide door featuring a stepped profile that acts as a barrier against airflow. Normally upgrading the door kit to the 30” wide model with stainless steel kick plate costs $250, however, you can get this upgrade for free. The door comes with two hinges that can be installed on the right or left to best fit your needs. The two cam-lift hinges are field-adjustable to compensate for settling and come with a locking set screw. To keep cooling costs low, a spring-loaded door closer is included. The 4-foot wide door panel comes with the door pre-hung and includes a vapor-proof LED lighting fixture activated by a switch connected to an external indicator light, replaceable heating wire, stainless steel trim, and a digital thermometer. To keep items inside secure, an NL 9800 deadbolt handle is included with an independent key/padlock feature. To prevent lock-ins there is a safety release inside.

To keep items frozen, a temperature of -10°F is maintained by the KLF77812-C 8' x 12' x 7'-7" H Capsule Pak Refrigeration that produces 6120 BTU/hr of cooling. To set the temperature inside the walk-in the Enviro-Control™ system is included, this will efficiently maintain the temperature and also lets you set the defrost timer. An automatic condensate vaporizer is included removing the need for drain lines.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)