Nor-Lake KLB812-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Indoor +35°F Cooler, 8' x 12' x 6'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, CPB075PC-S-0, R290 Capsule Pak Refrigeration, 115v/60/1-ph

To efficiently store and access large numbers of refrigerated goods a refrigerated walk-in unit like the KLB812-C 8' x 12' x 6'-7" H Kold Locker from NorLake is a great option. A total of 490 cu. ft. of space is provided by this walk-in coolers with top mounted compressor .

To achieve an R-value of 25 the 4" thick wall panels of this walk-in are constructed from foamed-in-place polyurethane insulation encased in 26 gauge steel. Both the interior and exterior sides of each panel feature an embossed stucco coating for resistance to corrosion. Assembling a Kold Locker walk-in is simple with each panel featuring female and male rails that mate together. Once mated together the panels are fully tightened with foamed-in-place cam locks which assure an airtight connection. The corners are kept sealed with panel gaskets that go around the outer perimeter without any breaks or cuts. Instead of using overlapping or mechanical fasteners, the ceiling and floor panels’ edge caps are foamed-in-place which will keep them secure for the life of the walk-in.

The standard door kit that comes with this walk-in unit comes with a 26” wide door. When this door is shut its stepped profile provides a mechanical barrier that keeps the heat out efficiently. The door is mounted on two cam-lift hinges that can be installed on the left or right of the unit. The hinges are field-adjustable to adjust how the door hangs for smooth opening and closing and can be locked in with a set screw. A spring-actuated door closer is included to make sure the door is never left ajar. The door comes pre-hung in a 4’ wide panel with a replaceable perimeter heating wire, magnetic stainless steel trim, a digital thermometer, a vapor proof LED lighting fixture and a switch with exterior indicator light. The door can be secured with an NL 9800 deadbolt locking handle with an independent key/padlock feature. To prevent workers from being locked inside, a safety release is included.

The ceiling-mounted refrigeration unit is an RCPB075JC-S-4-EV Capsule Pak unit that produces 6250 BTU/hr of efficient cooling that maintains temperatures between 35°F and 38°F. The Enviro-Control™ system allows the interior temperature to be set and maintained efficiently. The controller is also used to set the defrost timer and activate a manual defrost cycle. To eliminate the need for drain lines, a condensate vaporizer is included.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)