Nor-Lake KLB7768-C Walk-In Cooler & Top Mounted Compressor
- 2023 model, meets the newest EPA and DOE codes.
- A refrigeration Technician is not required.
- Our Exclusive FREE extras:
- Stainless Steel 30'' x 36'' door kick-plate
- Standard features
- Full 4” thick panels foamed-in-place with HFC-245fa polyurethane insulation which is CFC and HCFC free
- Free electronic controls and digital thermometer
- Note! Refrigeration systems weigh 175lbs to 350lbs. and may require a hoist. The electrical hook-up may require a licensed electrician.
Nor-Lake KLB7768-C Specifications
Nominal Width | 6 Feet |
---|---|
Nominal Depth | 8 Feet |
Brand | Nor-Lake |
Refrigerant Type | R-290 |
Refrigeration Mounted | Top |
Made in | USA |
Shipping | Quick Ship Model |
Category | Walk In Cooler, Modular, Self-Contained |
Compressor Location | Top Mounted |
With Floor | Floor Included |
Usage | Indoor |
Voltage | 115 Volts |
Width (in) | 72 |
Height (in) | 91 |
Depth (in) | 96 |
Weight | 1177.00 |
Additional Information on Nor-Lake KLB7768-C
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Nor-Lake KLB7768-C Description
For businesses that need a lot of refrigerated storage space, an indoor walk-in unit like the NorLake KLB7768-C 6' x 8' x 7'-7" H Kold Locker should be on the shortlist. 270 cu. ft. of refrigerated space is offered by this walk-in coolers with top mounted compressor .
The interior and exterior sides of the 4" panels that make up this walk-in are made from 26 gauge steel finished with a corrosion-resistant embossed stucco coating. The space between the steel panels is filled with foamed-in-place polyurethane insulation with an R-Value of 25. Each panel has male and female rails that self-align mechanically, the panels are then tightened together with foamed-in-place cam locking fasteners for an airtight seal. Panel gaskets located on the outer perimeter of the corner panels are continuous without cuts or breaks. The ceiling and floor panels on this unit have edge caps that are foamed-in-place rather than mechanically fastened to prevent them from coming loose.
The door that ships standard with this walk-in unit is 26” wide and comes with a stepped profile providing a barrier against airflow. The door comes with two hinges that can be installed on the right or left to best fit your needs. The two cam-lift hinges are field-adjustable to compensate for settling and come with a locking set screw. To keep cooling costs low, a spring-loaded door closer is included.
If you will be regularly moving large loads of product on hand dollies, you might want to avail of the free upgrade to a 30” door kit. This makes it easier to move wider loads while a stainless steel kick plate protects against bumps from dollies.
The door is pre-hung in a 4-foot wide panel and features a magnetic stainless steel trim, digital thermometer, replaceable perimeter heating wire, and vapor proof LED light fixture actuated by a switch with external indicator light. Everything inside the walk-in is kept secure by an NL 9800 deadbolt handle with an independent key/padlock feature. To keep workers safe, a safety release inside the door panel makes sure no-one gets locked inside.
To keep items inside between 35°F and 38°F this walk-in features the RCPB050JC-S-0-EV Capsule Pak Refrigeration system that produces 4060 BTU/hr. The Enviro-Control™ electronic controller system sets the temperature inside the walk-in and also sets the automatic defrost timer. To remove the need for a drain line, an automatic condensate vaporizer is shipped loose with the unit and needs to be field wired.
Standard Features:
- STANDARD MODELS SHIP THE SAME DAY
- DOE compliant
- USDA accepted
- Magnetic gasket
- 15 year panel warranty
- Cooler or freezer models
- Indoor or outdoor models
- 26" wide, self-closing door
- CN UL flame spread listed
- Perimeter door heater wire
- Floor double sweep gasket
- Spring actuated door closer
- Sizes from 4' x 6' to 10' x 14'
- Two temperatures: +35°F, -10°F
- 18 months parts & labor warranty
- Digital thermometer and light switch
- Heavy duty adjustable cam-lift hinges
- Three heights: 6'7" & 7'7" with floor; 7'4" floorless
- Air-cooled condensing unit (wall mount - 10 day ship)
- Smooth aluminum interior floor (on models with floor)
- Floorless models supplied with NSF listed vinyl sealers
- Oregon State listed, City of Houston listed & California State listed
- Automatic condensate vaporizer. No drain line required on indoor units
- Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
- Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
- Deadbolt locking handle with independent key/padlock feature and inside safety release
- Time clock or electronic control provided for automatic defrost on both coolers and freezers
- 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
- NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
- UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
- High output low profile LED light positioned above the door to prevent interference with shelving or product
- Hot gas condensate vaporizer available on many models
- Refrigeration hood
- -20°F ambient controls
- White membrane roof and trim
- Exterior ramp
- Electric vaporizer
- Floor tread plate kit
- U-shaped shelving system
- Door hood (outdoor models)
- Five year compressor warranty
- Condensing unit air deflector kit
- Heights: 8'7" with floor, 8'4" without floor
- Leak detector/alarm (may be a requirement in some areas)
- Heater kit for outdoor use where ambient conditions may go below 32°F
- Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Nor-Lake KLB7768-C Accessories
Nor-Lake KLB7768-C Reviews
There are no reviews yet for this product.