Nor-Lake KLB74810-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Indoor +35°F Cooler, 8' x 10' x 7'-4" H, floorless, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, KL2 QUALIFIER, CPB075PC-S-0, R290 Capsule Pak Refrigeration, 115v/60/1-ph

For businesses that need to store a large number of refrigerated items safely and conveniently the KLB74810-C 8' x 10' x 7'-4" H Kold Locker from NorLake is a reliable indoor floorless walk-in cooler up to the task. 

Each panel of this walk-in coolers with top mounted compressor are 4” thick and comes with a corrosion-resistant embossed stucco finish on 26 gauge steel for durability. The interior is filled with EPA-compliant polyurethane foamed-in-place insulation. For ease-of-installation, each panel has male and female rails that come together to ensure proper alignment. To maintain an air-tight seal between each panel foamed-in-place cam locking fasteners are used. A continuous panel gasket wraps around outer perimeter free from breaks or cuts at the corners. Instead of using overlapping or mechanical fasteners, the ceiling panels’ edge caps are foamed-in-place which will keep them secure for the life of the walk-in.

The door that ships standard with this walk-in unit is 26” wide and comes with a stepped profile providing a barrier against airflow. The standard door kit can be replaced with the optional 30” wide door kit with stainless steel kick plate with no additional cost. Two cam-lift hinges are included with this door and can be installed to open from the right or left. These hinges are field-adjustable to compensate for settling over the life of the walk-in. A spring-loaded door closer is included to make sure the door is not left open accidentally. The door panel is 4’ wide with the door pre-hung from the factory. A replaceable perimeter heating wire is included as well as a vapor proof LED lighting fixture that is activated by a switch complete with an exterior indicator light, a digital thermometer, and magnetic stainless steel trim. The interior is secured with an NL 9800 deadbolt handle with an independent key/padlock feature. To keep workers safe, the interior has a safety release to make sure they are never locked in.

The temperature inside this walk-in is kept between 35°F and 38°F by the ceiling-mounted RCPB075JC-S-4-E Capsule Pak Refrigeration System that produces 6250 BTU/hr of cooling potential. The Enviro-Control™ system allows the interior temperature to be set and maintained efficiently. The controller is also used to set the defrost timer and activate a manual defrost cycle. To eliminate the need for drain lines, a condensate vaporizer is included.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)