Nor-Lake KLB610-C Walk-In Cooler & Top Mounted Compressor
- 2023 model, meets the newest EPA and DOE codes.
- A refrigeration Technician is not required.
- Our Exclusive FREE extras:
- Stainless Steel 30'' x 36'' door kick-plate
- Standard features
- Full 4” thick panels foamed-in-place with HFC-245fa polyurethane insulation which is CFC and HCFC free
- Note! Refrigeration systems weigh 175lbs to 350lbs. and may require a hoist. The electrical hook-up may require a licensed electrician.
Nor-Lake KLB610-C Specifications
Nominal Depth | 10 Feet |
---|---|
Nominal Width | 6 Feet |
Brand | Nor-Lake |
Refrigerant Type | R-290 |
Refrigeration Mounted | Top |
Made in | USA |
Shipping | Quick Ship Model |
Category | Walk In Cooler, Modular, Self-Contained |
Capacity | 295 Cubic Feet |
Compressor Location | Top Mounted |
Door Type | Solid |
Door Design | Swing |
With Floor | Floor Included |
Temperature Range | 35 - 38 Degrees F |
Usage | Indoor |
Voltage | 115 Volts |
Width (in) | 72 |
Height (in) | 79 |
Depth (in) | 120 |
Weight | 1248.00 |
Additional Information on Nor-Lake KLB610-C
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Nor-Lake KLB610-C Description
For businesses that need to store a large number of refrigerated items safely and conveniently the KLB610-C 6' x 10' x 6'-7" H Kold Locker from NorLake is a reliable indoor walk-in cooler up to the task. A total of 295 cu. ft. of space is provided by this walk-in coolers with top mounted compressor .
The wall panels are 4” thick with foamed-in-place polyurethane insulation encased in 26 gauge steel protected by an embossed stucco coating for corrosion resistance. These panels provide an R-value of 25. For ease-of-installation, each panel has male and female rails that come together to ensure proper alignment. To maintain an air-tight seal between each panel foamed-in-place cam locking fasteners are used. A continuous panel gasket wraps around outer perimeter free from breaks or cuts at the corners. Each ceiling and floor panel has foamed-in-place edge caps that can’t come loose compared to those that are overlapped or mechanically fastened.
The standard door is 26” wide with a stepped profile to provide a barrier to airflow for an energy-efficient door. Two cam-lift hinges are included with this door and can be installed to open from the right or left. These hinges are field-adjustable to compensate for settling over the life of the walk-in. A spring-loaded door closer is included to make sure the door is not left open accidentally. The door is pre-hung in a 4-foot wide panel and features a magnetic stainless steel trim, digital thermometer, replaceable perimeter heating wire, and vapor proof LED light fixture actuated by a switch with external indicator light. Everything inside the walk-in is kept secure by an NL 9800 deadbolt handle with an independent key/padlock feature. To keep workers safe, a safety release inside the door panel makes sure no-one gets locked inside.
A temperature between 35°F and 38°F is efficiently maintained by the ceiling-mounted RCPB050JC-S-0-EV Capsule Pak Refrigeration System that produces 4060 BTU/hr of heat rejection. Setting the temperature inside the unit is easy with the Enviro-Control™ system. This also allows you to set the defrost timer and activate a manual defrost cycle. For ease of installation, an automatic condensate vaporizer is included to remove the need for drain lines and a floor drain.
Standard Features:
- STANDARD MODELS SHIP THE SAME DAY
- DOE compliant
- USDA accepted
- Magnetic gasket
- 15 year panel warranty
- Cooler or freezer models
- Indoor or outdoor models
- 26" wide, self-closing door
- CN UL flame spread listed
- Perimeter door heater wire
- Floor double sweep gasket
- Spring actuated door closer
- Sizes from 4' x 6' to 10' x 14'
- Two temperatures: +35°F, -10°F
- 18 months parts & labor warranty
- Digital thermometer and light switch
- Heavy duty adjustable cam-lift hinges
- Three heights: 6'7" & 7'7" with floor; 7'4" floorless
- Air-cooled condensing unit (wall mount - 10 day ship)
- Smooth aluminum interior floor (on models with floor)
- Floorless models supplied with NSF listed vinyl sealers
- Oregon State listed, City of Houston listed & California State listed
- Automatic condensate vaporizer. No drain line required on indoor units
- Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
- Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
- Deadbolt locking handle with independent key/padlock feature and inside safety release
- Time clock or electronic control provided for automatic defrost on both coolers and freezers
- 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
- NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
- UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
- High output low profile LED light positioned above the door to prevent interference with shelving or product
- Hot gas condensate vaporizer available on many models
- Refrigeration hood
- -20°F ambient controls
- White membrane roof and trim
- Exterior ramp
- Electric vaporizer
- Floor tread plate kit
- U-shaped shelving system
- Door hood (outdoor models)
- Five year compressor warranty
- Condensing unit air deflector kit
- Heights: 8'7" with floor, 8'4" without floor
- Leak detector/alarm (may be a requirement in some areas)
- Heater kit for outdoor use where ambient conditions may go below 32°F
- Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)
NOTE! This is a general product line video and does not necessarily reflect the listed model.