Lakeside Manufacturing 8534 Roll-In Cooler Rack
MPN#: 8534
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Free Freight?
Quick Ship
$1,655.88
Login or add to cart to see our price!
Product Protection
Starting at
Description
Lakeside Manufacturing 8534 Description
Roll-In Cooler Rack, 64-1/2"H, open sides, capacity (12) pair universal stepped angle ledge, 4-1/2" spacing, welded aluminum construction, fits high type coolers, 5" swivel casters, NSF, Made in USARoll-In Cooler Rack, 64-1/2"H, open sides, capacity (12) pair universal stepped angle ledge, 4-1/2" spacing, welded aluminum construction, fits high type coolers, 5" swivel casters, NSF, Made in USAStandard Features:
Ideal transport and storage for a wide variety of pans, trays and containers.
- NSF listed.
- Durable, lightweight welded aluminum construction.
- Welded corner gussets maintain square unit integrity.
- Ledges are 6-1/4” wide and are welded on 4½” centers.
- Accommodates a variety of pans, trays, or storage boxes.
- Rugged square tubing frame provides durability and long life.
- Casters are 5” swivel plate type with No-Mark® polyurethane tread.
- All seams are fully welded and sealed to provide a smooth, easy-to-clean surface. No cracks or crevices to trap dirt!
Optional Accessories:
- Pan stop
- Solid sheet base
- Perimeter bumper
- Break casters (set of 2)
- Vertical leg bumpers (set of 4)
- Bottom corner bumpers (set of 4)
Specifications:
Shall be constructed of hi-tensile, corrosion resistant, rust proof, primary extruded aluminum, Type 6063-T5 alloy. All seams shall be heli-arc welded with all welded and sealed (no rivets). Vertical uprights shall be extruded tube, 1¼” x 1½” x .070 wall. Top and bottom frames shall be extruded tube, 1¼” x 1½” x .070 wall, welded and shall be welded to uprights. Bottom frame has caster plates (pre-tapped), 3/8” thick, welded to frame so that casters are inset. Gussets of 1½” x 1½” x 5/8” thick angle are welded to the inside angles (bottom side) where horizontal cross bracing meets vertical uprights with a 4-½” continuous weld. Two each tie rods of 1” x 1” x .070 wall extruded tube shall be welded to uprights. Extruded angle ledges are a stepped type, 2” x 6¼” x .100 thick, with all corners chamfered and deburred. Ledges are welded to uprights on 4-½” centers. Casters shall be all swivel with 5” diameter, non-markeing polyurethane tire, 1-¼” wide, with an operating temperature range of -25°F to +190°F. Wheel bearings shall be sealed and permanently lubricated.
Options
Q & A
Lakeside Manufacturing 8534 Specifications
| Cube | 24.4 |
|---|---|
| Brand | Lakeside Manufacturing |
| Made in | USA |
| Certifications | NSF |
| Type | Roll-In Refrigerator Racks |
| Assembled | Yes |
| Casters | Yes |
| Loading Style | End Load |
| Material | Aluminum |
| Rack Type | Roll-In Cooler Rack |
| Style | Universal |
| Sheet Pan Capacity | 12 Pans |
| Shelf Spacing | 4 1/2 Inches |
| Width (in) | 24.5 |
| Height (in) | 64.5 |
| Depth (in) | 25.25 |
| Length (in) | 25 1/4 Inches |
| Weight | 90.00 |
Additional Information on Lakeside Manufacturing 8534
Lakeside Manufacturing 8534 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Items Related to Lakeside Manufacturing 8534
Sheet Pan Racks 571 products
