Lakeside Manufacturing 8529 Roll-In Cooler Rack
MPN#: 8529
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Free Freight?
Quick Ship
$933.15
Login or add to cart to see our price!
Attention!
Order before 6/30/2025 to avoid price increases!
Order before 6/30/2025 to avoid price increases!
Product Protection
Starting at
Description
Lakeside Manufacturing 8529 Description
Roll-In Cooler Rack, 64"H, open sides, capacity (18) 18" x 26" pans or (36) half size pans, angle ledge, 3" spacing, welded aluminum construction, fits low type coolers, NSF, Made in USARoll-In Cooler Rack, 64"H, open sides, capacity (18) 18" x 26" pans or (36) half size pans, angle ledge, 3" spacing, welded aluminum construction, fits low type coolers, NSF, Made in USAStandard Features:
Durable, efficient storage system with all-welded aluminum construction
- Benefits
- Welded construction
- Light-weight aluminum is rust-proof
- Features
- NSF listed.
- Accommodates 18" x 26" or 14" x 18" pans and trays.
- Reinforced bottom design provides added durability during offsite transport.
- Channel and angle style ledges are continuously welded to the uprights to withstand rugged use.
- Casters
- Heavy-duty 5” plate-mount with non-marking poly wheels
Optional Accessories:
- Pan stop
- Solid sheet base
- Perimeter bumper
- Break casters (set of 2)
- Vertical leg bumpers (set of 4)
- Bottom corner bumpers (set of 4)
Specifications:
Shall be constructed of hi-tensile, corrosion-resistant, rust proof, primary extruded aluminum, Type 6463-T5 alloy. All seams shall be heli-arc welded and sealed (no rivets). Tray ledges 1-¼” x 1-5/8” x .100 extruded aluminum welded to frame on 3” or 5” centers, with channel type ledges to be on 1½” centers. Unit shall have four horizontal supports located at the top and center of 1” x 1” x .070 wall aluminum tube. Corner gussets of 1-½” x 1-½” x 5/8” thick angle shall be welded to the inside angles (bottom side) where horizontal cross bracing meets vertical uprights with a 4½” continuous weld. Unit base shall be constructed of 1” x 1” x .070 wall tube welded into a rectangular frame (20-½” x 26”), with two extra laterals where caster mount reinforcement plates shall be inset. reinforcement caster plates (2-¾” x 4” x 3/8”), pre-tapped for ¼” bolts, shall be welded to this frame. Casters shall be plate mount type, with 5” diameter non-marking polyurethane wheel, full swivel design with sealed ball bearing races.
Options
Q & A
Lakeside Manufacturing 8529 Specifications
| Cube | 21.4 |
|---|---|
| Brand | Lakeside Manufacturing |
| Made in | USA |
| Certifications | NSF |
| Type | Roll-In Refrigerator Racks |
| Assembled | Yes |
| Casters | Yes |
| Loading Style | End Load |
| Material | Aluminum |
| Rack Type | Roll-In Cooler Rack |
| Style | Storage |
| Sheet Pan Capacity | 18 Pans |
| Shelf Spacing | 3 Inches |
| Width (in) | 20.5 |
| Height (in) | 64 |
| Depth (in) | 26 |
| Length (in) | 26 |
| Weight | 48.00 |
Additional Information on Lakeside Manufacturing 8529
Items Related to Lakeside Manufacturing 8529
Sheet Pan Racks 571 products
