John Boos 44PB18-1D24R Pro-Bowl Sink
MPN#: 44PB18-1D24R
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Free Freight?
Quick Ship
$7,933.00
Product Protection
Starting at
John Boos 44PB18-1D24R Accessories
Description
John Boos 44PB18-1D24R Description
Pro-Bowl Sink, 4-compartment, 100-3/16"W x 23-1/2"D x 44-1/16"H overall size, (4) 18"W x 18" front-to-back x 12" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 45° top & 2" return, (2) sets of splash mount faucet holes with 8" centers, 3-1/2" die-stamped drain openings, 14/300 stainless steel construction, stainless steel legs, adjustable front & side bracing, adjustable bullet feet, NSF, CSA-Sanitation, KD
Keep your kitchen running smoothly and efficiently with the help of this commercial sink from John Boos. There are four compartments on this unit plus a 24" drainboard on the right side. Each compartment is 12" deep, 18" wide, and 18" front to back, so you can go through the cleaning process step by step with ease. This four-compartment sink won't falter under the most taxing conditions, thanks to the outstandingly tough 14-gauge 300 stainless steel construction.
CKitchen is home to a wide variety of commercial sinks such as compartment sinks, underbar sinks, and more.
Standard Features:
- 1" Faucet Holes in Backsplash
- 2 Sets of Faucet Holes 8" On-Center
- 12" & 14" Deep Four Compartment Sink Bowls
- All Corners, both Vertical and Horizontal, Coved At 5/8" Radius
- Standard 14ga Type 300 Stainless Steel with #4 Polish, Satin Finish
- Bottoms of Bowls Formed for Drainage to 3-1/2" Diameter Die Stamped Opening
- All Outside Corners of Assembly are Bullnosed to Provide Safe, Clean and Polished Edge
- Solid Stainless Steel Commercial Sink Front Panel, Type 300 Stainless Steel with #4 Polish, Satin Finish
- Full Length 10" High Boxed Backsplash, with 2" return to wall at 45 Degree and 3/4" turned down Rear Lip
- Note: More Restaurant Equipment & Underbar Sinks are available.
Construction
- Base: Stainless Steel Bases, Standard K.D.
- Top: Stainless Steel Sinks are TIG Welded, Exposed welds are polished to match Adjacent Surface
Material
- Gussets: Stainless Steel
- Legs: 1-5/8" Round O.D. Stainless Steel
- Bracing: 1-1/4" Round O.D. Stainless Steel
- Feet: 1" Adjustable Stainless Steel Bullet Feet
- Bowls & Top: 14ga Type 300 Stainless Steel with #4 Polish, Satin Finish
Options
Q & A
Items Related to John Boos 44PB18-1D24R
Four Compartment Sinks 551 products