John Boos 3PBCS16204-2D18 Pro-Bowl Corner Sink
MPN#: 3PBCS16204-2D18
Free Freight?
Quick Ship
$8,668.00 /
Calculate
Product Protection
Starting at
John Boos 3PBCS16204-2D18 Specifications
| Brand | John Boos |
|---|---|
| Gauge | 16 Gauge |
| Number of Drainboards | 2 |
| Type | Corner Sinks |
| Certifications | NSF |
| Number of Compartments | 3 |
| Width (in) | 58.50 |
| Height (in) | 44.06 |
| Depth (in) | 25.50 |
| Weight | 136.00 |
Additional Information on John Boos 3PBCS16204-2D18
caremaintenance.pdf 
john-boos-3pbcs16204-2d18.specsheet.pdf 
instructions.pdf 
john-boos-3pbcs16204-2d18.specsheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
John Boos 3PBCS16204-2D18 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
John Boos 3PBCS16204-2D18 Description
Pro-Bowl Corner Sink, 3-compartment, 58-1/2"W x 58-1/2"D x 44-1/16"H overall size, (2) 16"W x 20" front-to-back x 14" deep compartments & (1) 20"W x 20" front-to-back x 14" deep compartment in corner, (2) 18" left & right drainboards, 10"H boxed backsplash with 45° top and 2" return, (2) sets of splash mount faucet holes with 8" centers, 3-1/2" die-stamped drain opening, 16/300 stainless steel construction, stainless steel legs, bracing, & adjustable bullet feet, NSF, CSA-Sanitation
Standard Features:
- 16ga Stainless Steel
- 1" Faucet Holes in Backsplash
- 8" On-Center Faucet Holes in Backsplash
- Front to Back and Left to Right Lower Bracing
- Standard Stainless Steel Legs 1-5/8" Diameter
- 12" Or 14" Deep Three Compartment Sink Bowls
- Type 300 Stainless Steel With #4 Polish, Satin Finish
- All Corners, both Vertical and Horizontal, Coved at 3/4" Radius
- All Outside Corners of Assembly are Bullnosed to Provide Safe, Clean, and Polished Edge
- Bottoms of Commercial Sink Bowls Formed for Drainage to 3-1/2" Diameter Die Stamped Opening
- Full Length 10" High Boxed Backsplash, with 2" Return to Wall at 45 Degree and 1" Turned Down Rear Lip
- Note: More Restaurant Equipment, Compartment Sinks & Underbar Sinks are available
Construction
- Base: Stainless Steel Frame is TIG Welded
- Top: Stainless Steel Sinks are TIG Welded, Exposed welds are Polished to Match Adjacent Surface
Material
- Gussets: Stainless Steel
- Legs: 1-5/8" Round O.D. Stainless Steel
- Bracing: 1-1/4" Round O.D. Stainless Steel
- Feet: 1" Adjustable Stainless Steel Bullet Feet
- Bowls & Top: 16ga Type 300 Stainless Steel with #4 Polish, Satin Finish
John Boos 3PBCS16204-2D18 Accessories
John Boos 3PBCS16204-2D18 Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to John Boos 3PBCS16204-2D18
Commercial Sinks 3978 products
