Hatco GRSDS-36D Glo-Ray Merchandising Warmer, 36" W x 24.29" D x 32.4" H, with (2) Shelves and Thermostatic Controls - 120 Volts

Hatco GRSDS-36D Description

The 36" wide GRSDS-36D merchandising warmer has two heated shelves that can heat up a good amount of prepackaged or wrapped products at 185 degrees Fahrenheit to 200 degrees Fahrenheit with the help of top infrared heating that is designed to bring as much heat to other parts of the holding surface to get even heating quality. This 1810-watt unit has a stainless steel and aluminum body that comes in a glossy gray finish, making it durable, easy to maintain, and attractive.

The shelves are slanted to provide a view of the front and the back. The rear is open so your staff can place products for customers or servers to grab from the front for a seamless service. Each shelf comes with seven (7) rods that you can use to divide the base and arrange various products to create a pleasing and neat presentation.

The sides have tempered glass panels that add protection without blocking the view while the set of four shatter-resistant (4) incandescent bulbs, which are built to withstand the heat produced by the unit, brightly light up the contents for your customers to see. The unit is supported by 4" legs to keep the unit stable on your counter.

The Hatco GRSDS-36D merchandising warmer is a high-quality USA-made product that has passed cULus, UL EPH Classified, and ANSI/NSF 4 standards. This unit includes a 6-foot cord and plug and comes in a range of colors. Check out more parts and accessories below.

• Shelves are slanted for the convenience of self-service
• Thermostatically-controlled, hardcoated heated base has a temperature range of 185°- 200°F (85°- 93°C)
• Coated shatter-resistant incandescent lights enhance product display while safeguarding food products from bulb breakage
• Models have pre-focused infrared top heat directing heat to the outer edges of the holding surface where heat loss is the greatest
• NSF require units over 36" (914 mm) in width or weighing more than 80 lbs. (36 kg) to be either sealed, or raised on the installation surface with the 4" (102 mm) legs included
• Standard units shipped with: tempered glass side panels, hardcoated shelves, coated shatter-resistant incandescent lights, adjustable dividers, 4" (102 mm) legs , and a 6' (1829 mm) cord with plug

• Designer Colors
• Non-standard colors are non-returnable - Glossy Gray standard
  • Black 
  • Navy Blue 
  • Warm Red 
  • Gray Granite 
  • White Granite
  • Hunter Green 
  • Antique Copper
• 5" (127 mm) Sneeze Guard (customer side only)
  • 24" ( 609 mm) model
  • 30" ( 762 mm) model
  • 36" ( 914 mm) model
  • 41" (1041 mm) model
  • 52" (1321 mm) model
  • 60" (1524 mm) model
• Display Sign Holder (signs not included) Color Matches Unit Color - Top or Intermediate Shelf
  • 24" ( 609 mm) model
  • 36" ( 914 mm) model
  • 30" ( 762 mm) model
  • 52" (1321 mm) model
  • 41" (1041 mm) model
  • 60" (1524 mm) model
• Flip-up Door Locking Plate
• LED Indicating Temperature Control
• Stainless Steel End Panels in lieu of Glass End Panels
• Halogen Bulb (60 watt) in lieu of Standard Display Light (not available for export voltages)

• 4" (102 mm) Adjustable Legs
• (Standard on models GRSDS-36 and larger, and all dual models)
• Plexi-Glass Flip-Up doors on one side - Not compatible with optional sneeze guards in same opening (one side only)
  • 24" ( 609 mm) model 
  • 30" ( 762 mm) model
  • 36" ( 914 mm) model 
  • 41" (1041 mm) model
  • 60" (1524 mm) model, split door
  • 52" (1321 mm) model, split doors 
• Additional Stainless Steel Divider Rods