Hatco GRSDH-52D Glo-Ray Merchandising Warmer, 52" W x 19.5" D x 25.3" H, with (2) Shelves and Thermostatic Controls - 120 Volts

Hatco GRSDH-52D Description

The GRSDH-52D merchandising warmer is a 3520-watt high-capacity solution that comes with two large 50.59-inch horizontal shelves that you can customize to your specific food holding needs with the use of the 20 divider rods. Each shelf has a heated hard-coated base with thermostatic controls that allow you to set the temperature between 185 degrees Fahrenheit to 200 degrees Fahrenheit. Food holding performance is enhanced by the infrared top heating that creates wider heat coverage so that products get even heating.

This merchandiser warmer has a stainless steel and aluminum body, so it stays solid in shape even with daily heavy use. The sides are fitted with tempered glass while the front and back are open so that kitchen staff and servers can move products with a seamless flow.

You’ve got a total of eight (8)incandescent bulbs that light up the interior of this unit, making the products more irresistible and viewable. Four 4" legs support the weight of the warmer while making it easy to clean the space beneath it. This model has a standard Glossy Gray finish, but you can select a different finish that better suits your space with the selection we have below.

The Hatco GRSDH-52D merchandiser warmer is a USA-made piece of equipment that is approved for safe commercial use by cULus, UL EPH Classified, and ANSI/NSF 4. This model is supplied with a 6-foot cord with a plug. Want to customize your unit? Check out the parts and accessories we offer below.

• Thermostatically-controlled, hardcoated heated base has a temperature range of 185°- 200°F (85°- 93°C)
• Coated shatter-resistant incandescent lights enhance product display while safeguarding food products from bulb breakage
• Models have pre-focused infrared top heat directing heat to the outer edges of the holding surface where heat loss is the greatest
• NSF require units over 36" (914 mm) in width or weighing more than 80 lbs. (36 kg) to be either sealed, or raised on the installation surface with the 4" (102 mm) legs included
• Standard units shipped with: tempered glass side panels, hardcoated shelves, coated shatter-resistant incandescent lights, adjustable dividers, legs, and a 6' (1829 mm) cord with plug

• Designer Colors
• Non-standard colors are non-returnable - Glossy Gray standard
  • Black 
  • Navy Blue 
  • Warm Red 
  • Gray Granite 
  • White Granite
  • Hunter Green 
  • Antique Copper
• 5" (127 mm) Sneeze Guard (customer side or both sides)
  • 24" ( 609 mm) model 
  • 30" ( 762 mm) model
  • 36" ( 914 mm) model 
  • 41" (1041 mm) model
  • 52" (1321 mm) model 
  • 60" (1524 mm) model
• Display Sign Holder (signs not included) Color Matches Unit Color - Top or Intermediate Shelf
  • 24" ( 609 mm) model
  • 30" ( 762 mm) model
  • 36" ( 914 mm) model
  • 41" (1041 mm) model
  • 52" (1321 mm) model
  • 60" (1524 mm) model
• LED Indicating Temperature Control
• Stainless Steel End Panels in lieu of Glass End Panels
• Halogen Bulb (60 watt) in lieu of Standard Display Light (not available on export voltages)

• 4" (102 mm) Adjustable Legs
• (Standard on models GRSDH-41 and larger, and all dual models)
• Plexi-Glass Flip-Up doors on one side - Not compatible with optional sneeze guards in same opening (one side only)
  • 24" ( 609 mm) model 
  • 30" ( 762 mm) model
  • 36" ( 914 mm) model 
  • 41" (1041 mm) model
  • 60" (1524 mm) model, split door
  • 52" (1321 mm) model, split doors 
• Additional Stainless Steel Divider Rods