Hatco GRSDH-30D Glo-Ray Merchandising Warmer, 30" W x 19.5" D x 25.3" H, with (2) Shelves and Thermostatic Controls - 120 Volts
Hatco GRSDH-30D Specifications
Number of Shelves | (2) Shelves |
---|---|
Brand | Hatco |
Made in | USA |
Certifications | CE |
Control Type | Thermostatic |
Voltage | 120 Volts |
Width (in) | 30 |
Height (in) | 25.3 |
Depth (in) | 19.5 |
Weight | 100.00 |
Additional Information on Hatco GRSDH-30D
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Hatco GRSDH-30D Certifications
CE
The product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
Hatco GRSDH-30D Description
Glo-Ray® Merchandising Warmer, countertop, (12) rods, pass thru design, with (2) horizontal shelves, pre-focused infrared top heat, incandescent light, adjustable dividers, tempered glass sides, stainless steel & aluminum construction, with 4" legs, 1920 watts, CE, cULus, UL EPH Classified, Made in USAWith two (2) spacious 28.59" heated shelves, this 30" wide GRSDH-30D merchandising warmer can help you display and hold warm wrapped or boxed food items for longer periods, ensuring you always have hot and great-tasting pizza or sandwiches to serve hungry customers. Each heated hard coated shelf heats thermostatically at 185 to 200 degrees Fahrenheit while the dozen adjustable divider rods for both shelves give you tons of storage flexibility to present an array of products attractively. The top infrared heating provides heat to areas where there is a high loss of heat to maintain consistent temperatures throughout the holding surface.
This 1920-watt merchandiser warmer is stainless and aluminum, promising long years of quality and performance you can rely on. The sides have tempered glass panels while both the front and the rear are open, so your cooks can easily load products while the customers or servers can grab the food easily.
There are a total of four incandescent bulbs that illuminate the interior to accentuate the products and catch the eyes of your customers. The unit stands on 4" legs for added weight support, easy cleaning, and enhanced stability. This model comes in a Glossy Gray finish, but we have more colors for you to choose from.
The Hatco GRSDH-30D merchandiser warmer is made in the USA in compliance with cULus, UL EPH Classified, and ANSI/NSF 4 guidelines. This unit includes a 6-foot cord with plug and can be customized with parts and accessories.
Glo-Ray® Merchandising Warmer, counter model, (12) rods, pass thru design, with (2) shelves, horizontal shelves, stainless/aluminum construction, 4" legs, 1920 watts, cULus, UL EPH Classified, ANSI/NSF 4, Made in USA- Thermostatically-controlled, hardcoated heated base has a temperature range of 185°- 200°F (85°- 93°C)
- Coated shatter-resistant incandescent lights enhance product display while safeguarding food products from bulb breakage
- Models have pre-focused infrared top heat directing heat to the outer edges of the holding surface where heat loss is the greatest
- NSF require units over 36" (914 mm) in width or weighing more than 80 lbs. (36 kg) to be either sealed, or raised on the installation surface with the 4" (102 mm) legs included
- Standard units shipped with: tempered glass side panels, hardcoated shelves, coated shatter-resistant incandescent lights, adjustable dividers, legs, and a 6' (1829 mm) cord with plug
- Designer Colors
- Non-standard colors are non-returnable - Glossy Gray standard
- Black
- Navy Blue
- Warm Red
- Gray Granite
- White Granite
- Hunter Green
- Antique Copper
- 5" (127 mm) Sneeze Guard (customer side or both sides)
- 24" ( 609 mm) model
- 30" ( 762 mm) model
- 36" ( 914 mm) model
- 41" (1041 mm) model
- 52" (1321 mm) model
- 60" (1524 mm) model
- Display Sign Holder (signs not included) Color Matches Unit Color - Top or Intermediate Shelf
- 24" ( 609 mm) model
- 30" ( 762 mm) model
- 36" ( 914 mm) model
- 41" (1041 mm) model
- 52" (1321 mm) model
- 60" (1524 mm) model
- LED Indicating Temperature Control
- Stainless Steel End Panels in lieu of Glass End Panels
- Halogen Bulb (60 watt) in lieu of Standard Display Light (not available on export voltages)
- 4" (102 mm) Adjustable Legs
- (Standard on models GRSDH-41 and larger, and all dual models)
- Plexi-Glass Flip-Up doors on one side - Not compatible with optional sneeze guards in same opening (one side only)
- 24" ( 609 mm) model
- 30" ( 762 mm) model
- 36" ( 914 mm) model
- 41" (1041 mm) model
- 60" (1524 mm) model, split door
- 52" (1321 mm) model, split doors
- Additional Stainless Steel Divider Rods
Hatco GRSDH-30D Accessories
Hatco GRSDH-30D Reviews
There are no reviews yet for this product.