Hatco GR2SDS-30D Designer Slant Display Warmer, 36.25" W x 26.64" D x 33.84" H, with (2) Shelves and Thermostatic Controls - 120/208 Volts
Hatco GR2SDS-30D Specifications
Number of Shelves | (2) Shelves |
---|---|
Control Type | Adjustable Thermostat |
Brand | Hatco |
Made in | USA |
Certifications | cULus |
Voltage | 120/208 Volts |
Width (in) | 36.25 |
Height (in) | 33.84 |
Depth (in) | 26.64 |
Weight | 184.00 |
Additional Information on Hatco GR2SDS-30D
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Hatco GR2SDS-30D Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
Hatco GR2SDS-30D Description
Glo-Ray® Designer Slant Display Warmer, countertop, (2) shelves with (12) rods, adjustable thermostat, pre-focused infrared top heat, incandescent light, hardcoat aluminum base, tempered glass end panels, designer panels & corner caps, 4" legs, 2040 watts, cULus, UL EPH Classified, Made in USAThe Hatco GR2SDS-30D is a freestanding display warmer that packs both the style and the power to increase your impulse sales by displaying and holding two shelves of hot food for longer periods. This 2040-watt unit is sporting a clear anodized aluminum finish with black designer color insert panels and corner caps that are also available in other colors to better suit your space. There are a total of 12 rods that let you sort products to make them more pleasing and easier to find.
Both the shelves are made of hardcoat aluminum and heated at 185 degrees to 200 degrees Fahrenheit, with the thermostatic controls allowing for a more precise temperature adjustment so you can heat an array of products the right way without fuss. There are also metal protected sheathing elements that deliver the heat to parts of the shelves that tend to lose a lot of heat so that products enjoy uniform heating. There are tempered glass panels on the sides that enhance the look of the display warmer with the help of the shatter-resistant incandescent bulbs that light up the products for excellent visibility.
The Hatco GR2SDS-30D horizontal display warmer is made in the USA in compliance with the cULus, UL EPH Classified, and ANSI/NSF 4 standards. This unit ships with a 6-foot cord with plug. You can customize your unit with parts and accessories listed below.
Designer Slant Display Warmer, free-standing, (2) shelves with (12) rods, adjustable thermostat, incandescent light, hardcoat aluminum base, tempered glass end panels, designer panels & corner caps, 4" legs, 2040 watts, cULus, UL EPH Classified, ANSI/NSF 4, Made in USA- Shelves are slanted for the convience of self-service
- Thermostatically-controlled, hardcoated heated base has a temperature range of 185°- 200°F (85°- 93°C)
- Coated shatter-resistant incandescent lights enhance product display while safeguarding food products from bulb breakage
- Models have pre-focused infrared top heat directing heat to the outer edges of the holding surface where heat loss is the greatest
- NSF require units over 36" (914 mm) in width or weighing more than 80 lbs. (36 kg) to be either sealed to the installation surface or raised with the 4" (102 mm) legs included
- Standard units shipped with: tempered glass side panels, a thermostatically controlled heated base, infrared upper heating elements, incandescent lights, product divider rods, 4" (102 mm legs) and a 6' (1829 mm) cord with plug
- Designer Colors
- Non-standard colors are non-returnable - Clear Anodized Aluminum standard
- Black
- Navy Blue
- Warm Red
- Gray Granite
- White Granite
- Hunter Green
- Antique Copper
- Designer Inset Panel Colors
- Non-standard colors are non-returnable - Black standard
- Navy Blue
- Warm Red
- Gray Granite
- White Granite
- Hunter Green
- Antique Copper
- 5" (127 mm) Sneeze Guard on customer side only
- Plexi-Glass Flip Up Doors (split-door on models G2SDS-48 and larger)
- Indicating Temperature Control (LED) (adds 1 7⁄8" [48 mm] to unit depth)
- Dark Gray Corner Caps - Non-standard colors are non-returnable - Black standard
- Halogen Bulb (60 watt) in lieu of standard display light (not available on export voltages)
- Stainless Steel Rods
- Flip-up Control Cover
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Hatco GR2SDS-30D Accessories
Hatco GR2SDS-30D Reviews
There are no reviews yet for this product.