Hatco GR2SDH-30D Designer Horizontal Display Warmer, 36.25" W x 27" D x 29.05" H, with (2) Shelves and Thermostatic Controls - 120 Volts

Hatco GR2SDH-30D Description

The GR2SDH-30D freestanding display warmer features two horizontal heated shelves with 12 divider rods that allow you to maximize your space by warming and displaying two layers of food at a time. This 2020-watt unit is more stylish than your typical display warmer with its clear anodized aluminum finish and designer black color insert panels and corner caps, which are available in other colors that you can check below.

The aluminum heated base has a hard coating for excellent durability. Products, wrapped or boxed, can be safely warmed at 185 degrees to 200 degrees Fahrenheit. The thermostatic controls make it easier to set the precise temperature so you can be confident that your offerings are safely stored.  With the help of the metal-sheathed infrared heating elements that draw the heat to the obscure parts of the holding surface to maintain uniform heating all around. The sides of the units have tempered glass while the inside is brightly lit with four incandescent bulbs with shatter-resistant coating. 

The Hatco GR2SDH-30D freestanding display warmer is made in the USA and is approved for safe commercial use as per cULus, UL EPH Classified, and ANSI/NSF 4. This unit ships with a 6-foot cord with plug. You can outfit your unit with additional parts and accessories you can find below.

• Thermostatically-controlled, hard-coated heated base has a temperature range of 185°- 200°F (85°- 93°C)
• Coated shatter-resistant incandescent lights enhance product display while safeguarding food products from bulb breakage
• Models have pre-focused infrared top heat directing heat to the outer edges of the holding surface where heat loss is the greatest
• NSF require units over 36" (914 mm) in width or weighing more than 80 lbs. (36 kg) to be either sealed to the installation surface or raised with the 4" (102 mm) legs included
• Standard units shipped with: tempered glass side panels, a thermostatically controlled heated base, infrared upper heating elements, incandescent lights, product divider rods, 4" (102 mm legs) and a 6' (1829 mm) cord with plug

• Designer Colors
• Non-standard colors are non-returnable - Clear Anodized Aluminum standard
  • Black 
  • Navy Blue 
  • Warm Red
  • Gray Granite 
  • White Granite
  • Hunter Green 
  • Antique Copper
• Designer Inset Panel Colors
• Non-standard colors are non-returnable - Black standard
  • Navy Blue 
  • Warm Red 
  • Gray Granite 
  • White Granite
  • Hunter Green 
  • Antique Copper
• 5" (127 mm) Sneeze Guard
• Plexi-Glass Flip Up Doors (split-door on models G2SDH-48 and larger) 
• Indicating Temperature Control (LED) (adds 1 7⁄8" [48 mm] to unit depth)
• Dark Gray Corner Caps - Non-standard colors are non-returnable - Black standard
• Halogen Bulb in lieu of standard display light (60 watt) (not available on export voltages)
• Front Glass in lieu of channel dividers and divider rods. Cannot have Sneeze Guards or Flip-up doors

• Stainless Steel Rods
• Flip-up Control Cover