FWE / Food Warming Equipment Co., Inc. P-90-XL 1 Door Heated Banquet Cabinet Holds up to 72-90 Plates, 120 Volts

P-Series Banquet Cart, mobile, (72-90) 12-3/8" diameter covered plate capacity, Humi-temp heat system, adjustable thermostat, individual controls, insulated, removable humidifier pan, (1) flush mounted door, bar type push handles, (3) shelves, wraparound bumper, stainless steel interior & exterior, 6" casters (2) rigid & (2) swivel with brakes, cULus, UL EPH Classified, NSF, IPX4

With the FWE P-90-XL 1 Door Heated Banquet Cabinet it’s easy to hold, move, and serve large amounts of plated food efficiently with its heavy-duty purpose-built design. Inside this cabinet, three heavy-duty shelves can hold up to 90 12-⅜” plates stacked five high.

To set the temperature the manual controls allow for a setting between 90°F and 190°F in 10-degree increments. Staff can easily check the holding temperature inside the cabinet with a thermometer that doesn’t require electricity to operate. The cabinet is heated by FWE’s Patented Humi-Temp system which uses an Incoloy nickel-chromium alloy heating element. The air is kept nice and moist with a removable baffled humidifier pan and circulated by a fan-cooled blower motor.

For fast access to the interior, while ensuring the door is closed securely, this cabinet uses an edge-mounted positive closing full grip latch. To keep heat from escaping the stainless steel door is insulated and an air-tight seal is provided by a cabinet-mounted door gasket.

To make sure this cabinet is up to the task of serving in a commercial capacity it features 20 gauge stainless steel construction for the exterior. The exterior is polished for a clean look that’s easy to wipe down. The interior features 22 gauge stainless steel and coved corners that make cleaning as simple as possible. Keeping the interior nice and warm without using to much power is easy thanks to the UG-26 high-density fiberglass insulation in the top, sides, bottom, and back of the cabinet.

This cabinet is equipped with 6” heavy-duty polyurethane casters that make it easy to move into place. The base of the cabinet features a wraparound bumper that extends past the doors to protect the unit when being moved around. The bumper features a non-marking vinyl cushion that snaps into place to prevent scuffing on doors and walls.

To make sure this holding cabinet is up to the task of commercial use, it features CE and IPX4 certification as well as UL listing and UL EPH classification for safety and sanitation.

• P models are available for up to 11″ plates
• Heavy-duty “no sag” shelves are removable to facilitate thorough cleaning 
• Push/pull handles - allows easy maneuvering P-XL series’ models hold up to 12.375″ plates. 
• Eye level controls are up-front, recessed protected, easy to read and set, and include a full range °F/°C thermostat for easy operation. Thermometer continuously reads cabinet temperature – even without power source 
• FWE’s patented Humi-Temp heat and humidity system eliminates hot and cold spots by gently circulating hot, moist air throughout the interior of the cabinet. Humidity can be added to condition circulated heat, keeping food fresh and hot for hours 
• FWE banquet cabinets are constructed for high performance in restaurant and resort banquet operations. Engineered for transport applications - standard, stainless steel, tubular base frame is engineered to absorb vibration and shock during transport 

• ELECTRIC
  • Electronic controls
  • Upgraded element
  • Solar Digital Thermometer
  • 220 volt, 50/60 Hz, single phase
• DOORS
  • Paddle latch
  • Magnetic latch
  • Key locking door latch
  • Padlocking transport latch
• CASTERS
  • Floorlock
  • Larger casters
• EXTRAS
  • Dry erase board
  • Menu card holder
  • Cord winder bracket
  • Plate carriers: CP or UP
  • Ergo drop down handles
  • Extra shelves - factory installed