FWE P-108 P-Series Deep Banquet Cart

P-Series Deep Banquet Cart, (1) compartment, (90-108) 11" diameter covered plate capacity, Humi-temp heat system, adjustable thermostat, recessed front controls, insulated, bar type push handles, includes (3) shelves, wraparound bumper, (1) flush mounted door, stainless steel interior & exterior, 6" casters (2) rigid & (2) swivel with brakes, cULus, UL EPH Classified, NSF, IPX4

When you need to keep a large amount of plated food warm and move it to where it’s going to be served, a purpose-built heating cabinet like the P-108 1 Door Heated Banquet Cabinet from FWE is an essential piece of equipment. To store up to 108 covered 11” plates, this cabinet comes with three no-sag shelves that bear the weight without any issues.

The simple manual thermostat has ten-degree increments to set the temperature from 90°F to 190°F. An analog thermometer allows users to monitor the temperature inside the cabinet even without power. To circulate warm moist air around the cabinet a fan-cooled blower motor forces air through a baffled humidifier pan and Incoloy nickel-chromium heating element. This provides even heating that spreads the heat to the entire interior.

With a full grip edge-mounted latch that’s easy to grasp users will find it easy to open the door and it will always close positively to keep the heat in. A cabinet mounted door seal is installed to maintain an air-tight seal. The insulated stainless steel door locks the heat in thanks to a cabinet-mounted door gasket.

The durable 20 gauge stainless steel exterior is made to stand up to serious commercial use and features a polished finish for easy maintenance. The interior is made from 22 gauge stainless steel with coved corners to make cleaning easy. This cabinet is insulated with UG-26 high-density fiberglass in the bottom, back, sides, and top of this cabinet. This keeps the heat in while saving on power usage. 

Moving this cabinet around is a breeze thanks to the 6" maintenance-free polyurethane tire casters. The base of the cabinet features a wraparound bumper that extends past the doors to protect the unit when being moved around. The bumper features a non-marking vinyl cushion that snaps into place to prevent scuffing on doors and walls.

To assure quality, safety, and sanitation, this holding cabinet is UL listed, EPH Classified, and features both IPX4 and CE certification.

• Push/pull handles - allows easy maneuvering 
• Heavy-duty “no sag” shelves are removable to facilitate thorough cleaning 
• P series’ models holds up to 11″ plates. P-XL models are available for up to 12.375″ plates 
• Available for immediate shipment - FWE’s popular P-120 is available to ship in 48 hours (Quick Ship terms and conditions apply) 
• Eye level controls are up-front, recessed protected, easy to read and set, and include a full-range °F/°C thermostat for easy operation. Thermometer continuously reads cabinet temperature – even without power source! 
• FWE’s patented Humi-Temp heat and humidity system eliminates hot and cold spots by gently circulating hot, moist air throughout the interior of the cabinet. Humidity can be added to condition circulated heat, keeping food fresh and hot for hours 
• FWE banquet cabinets are constructed for high performance in restaurant and resort banquet operations. Engineered for transport applications - standard, stainless steel, tubular base frame is engineered to absorb vibration and shock during transport 

• ELECTRIC
  • Electronic controls
  • Upgraded element
  • Solar Digital Thermometer
  • 220 volt, 50/60 Hz, single phase
• DOORS
• • Paddle latch
  • Magnetic latch
  • Key locking door latch
  • Padlocking transport latch
• CASTERS
  • Floorlock
  • Larger casters
• EXTRAS
  • Dry erase board
  • Menu card holder
  • Cord winder bracket
  • Ergo drop down handle
  • Plate carriers: CP or UP
  • Extra shelves - factory installed