Everest Refrigeration ETBSF2 35.63'' 2 Section Undercounter Freezer with 2 Left/Right Hinged Solid Doors and Front Breathing Compressor

Everest Refrigeration ETBSF2 Description

Undercounter/Worktop Freezer, two-section, 35-5/8"W, 10.0 cu. ft. capacity, self-contained bottom mounted refrigeration, 16 gauge stainless steel worktop, (2) solid hinged self-closing doors (locking), (4) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, defrost cycle with heater, front air breathing, pressure relief port, stainless steel interior, stainless steel front & sides, galvanized steel bottom & rear, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/3 HP, 115v/60/1-ph, 4.7 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation

• Front air breathing for flexibility in installation.
• R290 models include full-length air duct system.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Time-initiated and temperature-terminated defrost cycle with defrost heater.
• Pressure relief devices allow smooth access to cabinet interior when reopening doors.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models.
• High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R404A refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. Ask about alternative refrigerant.

• Galvanized steel bottom and rear.
• Four 5" swivel casters with locks on front set.
• 16 gauge, high quality stainless steel worktop.
• 2.5" thick high density polyurethane insulation.
• Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.

• High strength, recessed door handles.
• Heavy duty stainless steel interior / exterior.
• 2.5" thick high density polyurethane insulation.
• Frame heaters prevent exterior moisture build up.
• Pre-installed door locks keep your items safe from theft.
• Self-closing with adjustable torsion system for a positive seal.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.

• Height adjustable stainless steel clips.
• Two epoxy coated, steel wire shelves per section.

• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
• R290 models include audible overheat protection alarm for compressor and condenser coil.

• Additional shelving.
• 3” swivel casters with locks.
• 3.5” - 6” height-adjustable and interchangeable legs.
• 4” high stainless steel backsplash for worktop application.