Everest Refrigeration EBD2-CT 2 Taps 1/2 Barrel Draft Beer Cooler - Black, 2 Kegs Capacity, 115 Volts

Description

Everest Refrigeration EBD2-CT Description

Club Top Direct Draw Keg Refrigerator, two-section, 57-3/4"W, 20.0 cu. ft. capacity, self-contained side mounted refrigeration, (2) solid hinged doors (locking), holds (2) 1/2 barrel kegs, (1) sliding club top lid, (1) epoxy coated wire shelf, (2) 3" diameter insulated stainless steel draft towers (NSF) with air distributor, (2) single faucets, stainless steel countertop & lid, digital controls with LED display, auto defrost, LED interior lighting, textured & laminated black vinyl exterior, galvanized steel interior wall & stainless steel floor, exterior drain port for excess top tray moisture, drain hose not included, floor drain required, R290 Hydrocarbon refrigerant, 1/4 HP, 115v/60/1-ph, 4.0 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation

• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Side mounted R290 condensing unit uses environmentally friendly, EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP).

• Compact, easy-access club top compartment.
• Built-in caster thread receptacles for all models.
• 1 3/4" thick high density polyurethane insulation.
• Galvanized steel interior walls and high quality stainless steel floor.
• Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.

• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

• Pre-installed door locks keep your items safe from theft.
• High strength door handles are recessed for doors and raised for club top lids.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.
• Textured laminate, black vinyl exterior and galvanized steel interior with 1 3/4” thick high density polyurethane insulation for doors. Heavy duty stainless steel exterior and galvanized steel interior with 3/4” thick high density polyurethane insulation for cub top lids.

• Two single faucet, 3" diameter, stainless steel draft arms with matching air distributors. Fully insulated and NSF certified.

• One epoxy coated, steel wire shelf.
• Height adjustable stainless steel clips.

• Multi-function digital controller with easy to read LED display.
• Audible overheat protection alarm for compressor and condenser coil.
• Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.

• 3” or 5” swivel casters with locks.
• 3.5” – 6” height-adjustable and interchangeable legs.
• Dual or triple faucet draft arms and matching air distributors.

Close Description