Description
Duke TEHF-60SS Description Thurmaduke™ Hot Food Unit, mobile, electric, 60"W x 32"D x 36"H, 16ga stainless steel top, (4) stainless steel heat wells, drains, copper manifolds, (1) valve, thermostats, dish shelf, 20ga stainless steel body & undershelf, 5" swivel casters & brakes, 6 ft cord with plug, cULus, UL EPH Classified (NOTE: Electric values & plug configurations change for 3 phase or when adding electric options - Contact Factory for more info)
Close Description Options
Options for Duke TEHF-60SS Serving shelves & sneeze guards Fabrication, electrical & special body modifications Move cord set to operator's left +$84.60
Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$164.70
Bumpers (3" x 3" rubber corners) (per set) +$139.50
Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$66.60
Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$66.60
Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$66.60
Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$165.60
Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$513.90
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$158.40
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$250.20
Omission of shelves, open base +$738.00
Special Height Body, per unit
For special width body…per unit +$323.10
Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$323.10
Individual brass valves +$467.10
Pedestal-type duplex outlet, mounted, not wired +$361.80
Pedestal-type duplex outlet, mounted, wired to existing power source +$492.30
Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$673.20
Modified base - to accept roll warmer (warmer by other manufacturers) not wired...per roll warmer +$593.10
For special length not listed (maximum one-piece length of 88"): To next longer standard unit price...ADD (for TST models) +$323.10
6" high stainless steel legs in lieu of standard casters, with stainless steel adjustable foot
For pass-thru construction +$323.10
No Drains, in lieu of standard drains
Exposed element hot food wells with stainless spillage pan, in lieu of standard wells in a (4) well unit +$534.60
Locate drains on left +$84.60
Recess top to hold 18" x 26" pans, NOTE: not available with model #HTD-BASE-M heat in base option +$860.40
Tray slide - operator's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$554.40
Tray Slide, operator's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$600.30
Tray slide - customer's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$554.40
Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$600.30
Kickplates Kick Plate, customer's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$333.90
Kick Plate, customer's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$333.90
Kick Plate, operator's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$333.90
Kick Plate, operator's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$333.90
Cutting board - customer's side Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,048.50
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$954.00
Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,129.50
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$657.00
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,035.00
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$576.00
Cutting board - operator's side Cutting Board, operator's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,048.50
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$954.00
Cutting Board, operator's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,129.50
Cutting Board, operator's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$657.00
Cutting Board/Shelf , operator's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,035.00
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$576.00
Doors Sliding doors, stainless steel, for customer's side of hot food units with (4) openings (not available on gas models), UL, UL EPH Classified +$1,779.30
Sliding doors, customer's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$1,853.10
Sliding doors, stainless steel, for operator's side of hot food units with (4) openings (not available on gas models), UL, UL EPH Classified +$817.20
Sliding doors, operator's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$891.00
Voltages 120v/60/1-ph, 3000 watts, 25.0 amps
120v/60/1-ph, 1880 watts, 15.7 amps (special low watt option)
208v/60/1-ph, 3600 watts, 17.3 amps
208v/60/3-ph, 3600 watts, 10.0 amps +$212.40
240v/60/1-ph, 4800 watts, 20.0 amps
240v/60/3-ph, 4800 watts, 11.5 amps +$212.40
Close Options Duke TEHF-60SS
Electric Hot Food Serving Counter
with Controls, 
