Description
Duke E-4-CBSS Description Thurmaduke™ Steamtable Unit, electric, 60"W x 25-1/2"D x 36"H, 16ga stainless steel top, (4) stainless steel sealed heat wells, drains, copper manifolds, (1) brass valve, thermostat controls, 20ga stainless steel body & undershelf, 6"H stainless steel legs with adjustable feet, cULus, UL EPH Classified NOTE: Electric values & plug configurations change for 3 phase or when adding electric options - Contact Factory for more info)
Close Description Options
Options for Duke E-4-CBSS Serving shelves & sneeze guards Cutting board/shelf - customer's side Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,048.50
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$576.00
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (specify any special height) +$954.00
Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,129.50
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$657.00
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,035.00
Cutting board/shelf - operator's side Cutting Board, operator's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,048.50
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$576.00
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (specify any special height) +$954.00
Cutting Board, operator's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,129.50
Cutting Board, operator's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$657.00
Cutting Board/Shelf , operator's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,035.00
Fabrication, electrical & special body modifications Move cord set to operator's left +$84.60
Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$164.70
Bumpers (3" x 3" rubber corners) (per set) +$139.50
Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$66.60
Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$66.60
Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$66.60
Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$165.60
Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$513.90
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$158.40
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$250.20
Omission of shelves, open base +$738.00
Special height legs (per leg) (shorter height voids NSF approval) +$63.90
Special Height Body, per unit
For special width body…per unit +$323.10
Body latches for holding portable units together, pair +$126.00
Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$323.10
Individual brass valves +$467.10
Pedestal-type duplex outlet, mounted, not wired +$361.80
Pedestal-type duplex outlet, mounted, wired to existing power source +$492.30
Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$673.20
Modified base - to accept roll warmer (warmer by other manufacturers) not wired...per roll warmer +$593.10
For pass-thru construction +$323.10
No Drains, in lieu of standard drains
Exposed element hot food wells with stainless spillage pan, in lieu of standard wells in a (4) well unit +$534.60
Polyvinyl Bumper, full perimeter gray vinyl on stainless steel frame, 6" above floor & extends 2-1/2" from the body +$314.10
Doors - customer's side Sliding doors, stainless steel, for customer's side of hot food units with (4) openings (not available on gas models), UL, UL EPH Classified +$1,779.30
Sliding doors, customer's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$1,853.10
Tray slide - customer's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$554.40
Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$600.30
Tray slide - operator's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$554.40
Tray Slide, operator's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$600.30
Voltage options 120v/60/1-ph, 3000 watts, 25.0 amps
208v/60/1-ph, 3000 watts, 14.4 amps
208v/60/3-ph, 3000 watts, 8.4 amps +$212.40
240v/60/1-ph, 3000 watts, 12.5 amps
240v/60/3-ph, 3000 watts, 7.3 amps +$212.40
Close Options Duke E-4-CBSS
Electric Hot Food Serving Counter
with Controls, 
