Delfield GAR1NP-S 24'' 18 cu. ft. Top Mounted 1 Section Solid Half Door Reach-In Refrigerator

The one-door GAR1NP-S Specification Line® reach-in refrigerator provides a seamless way for food businesses to add 18 cubic feet of cold storage to their kitchen. This unit is only 24" wide, making it narrower than typical reach-in refrigerators. The stainless steel exterior is strong and easy to keep clean for easy maintenance and longer service life.

It has a single full-height door that stays open past 90 degrees so you won’t have to use your hand to manually keep it open when you are moving products in or out. It also closes automatically below 90 degrees, which is a great way to prevent issues of accidentally leaving it open when things get busier in the kitchen. 

The door is lockable to prevent theft or tampering. The gasket, removable without the use of tools, forms a tight seal around the cabinet. The raised ABS interior liner protects the gasket from damage that might come from removing bulkier or sharper items.

Temperature inside the cabinet is kept between 33 ̊F and 40 ̊F. You can easily view the current temperature and check for low or high temperature fluctuations on the digital external display. 

The entire refrigeration system is mounted on the top independent of the food zone so you can get as much interior space as possible. Three (3) shelves are standard in this unit, each one adjustable and mounted on stainless steel pilaster for strong product support. LED lighting on the interior so all the products are clearly visible.

The Delfield reach-in refrigerator an easyTouch controller that provides you convenient access to everything you need to operate this unit. Plus, if you connect it to your smartphone or tablet, you can monitor performance, get alerts, and address potential issues wherever you are.

This unit meets ENERGY STAR guidelines with its R290 hydrocarbon refrigerant with TXV expansion valve and high-density foamed-in-place polyurethane insulation. Electronic temperature controls improve pull-down times to help the 0.22 HP compressor last longer. The adaptive defrost and hot gas system take the complexities out of evaporator maintenance. 

The GAR1NP-S Specification Line® Refrigerator is NSF and cULus certified. It is rated at 4.2 amps and uses 115v/60/1-ph electrical connection. A 10' cord and NEMA 5-15P are supplied. Enjoy three years of parts and labor warranty and an additional two years for compressor parts with your purchase.

Get the best commercial refrigerators & freezers at the best prices only here at CKitchen!

• Door locks
• Chrome standard
• 3 shelves per section
• Removable side louver
• 115V / 60C / 1 P Standard
• 10’ cord and plug attached
• Raised ABS interior door liner
• Energy saving LED interior light
• Stainless steel pilaster with shelf clips
• Stainless steel exterior front, sides & interior
• Field rehingable doors - full height doors only
• Patented, lifetime warranty integral door handle
• 5” locking casters shipped loose for field installation
• easyTouch Control with remote monitoring capability
• Energy efficient door gasket - removable without tools
• Smart door hinge that auto closes up to 90˚ and stays open past 90˚
• Digital exterior temperature display with high/low temp visual alarms
• Three year parts and labor warranty and an additional 2 year compressor parts warranty
• GreenGenius™ R290 top mount refrigeration system featuring TXV expansion valve and hot gas condensate removal

• Kick plate
• Trim strips
• Utility base
• S/S finish door liner
• Stainless steel back
• 6” Stainless steel feet
• 6” Casters (all locking)
• Stainless steel shelves
• Foot Pedal Door Opener
• Tray/Pan Slides - various
• Additional chrome shelves
• Laminate - front, ends, shroud
• 6” Stainless Steel flanged feet
• Heat shield end - max temp 400 degrees