Cleveland Range KEL60SH Short Series" Steam Jacketed Kettle
MPN#: KEL60SH
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Free Freight?
Quick Ship
$30,039.00
Contact us for details
Product Protection
Starting at
- Please see specification sheet for installation clearance requirements
- Free Start-Up Program: Includes a performance check-out by Factory Authorized Servicer after installation and equipment demonstration by factory trained sales rep.
Cleveland Range KEL60SH Accessories
Cleveland Range KP Kettle Paddle
$260.00
Cleveland Range KW Whip
$521.00
Cleveland Range KB Kettle Brush
$244.00
Cleveland Range KL Ladle
$420.00
Cleveland Range KAK Kettle Accessory Kit
$1,572.00
Description
Cleveland Range KEL60SH Description
Short Series™ Steam Jacketed Kettle, electric, 60-gallon capacity, full steam jacket design, 34.8" rim height, solid-state temperature controls, power on/off switch, drain strainer, faucet mounting bracket, spring assisted cover, 2" tangent draw-off, 50 psi rating, open tri-leg base, stainless steel construction with 316 series stainless steel interior, CEShort Series™ Steam Jacketed Kettle, electric, 60-gallon capacity, full steam jacket design, 34.8" rim height, open tri-leg base, stainless steel construction, solid-state temperature controls, power on/off switch, drain strainer, faucet mounting bracket, spring assisted cover, 2" tangent draw-off, 50 psi ratingStandard Features:
- 50 psi safety valve
- Faucet mounting bracket
- Water resistant controls, splash-proof construction
- 2˝ diameter tangent draw-off valve with drain strainer
- Typical approvals include UL., CSA, CE, NSF and ASME
- Standard voltage is 208-240 volts, 60 Hz, 3 Phase, 3-wire
- 50 psi steam jacket rating for higher cooking temperatures
- Spring-assisted, hinged, rotatable, domed stainless steel cover
- Self-contained, easily installed - needs only an electrical hook-up
- 1 5/8˝ O.D. tri-leg supports with level adjustable feet for floor bolting
- Solid state water level control (no sight glass gauge to break or leak)
- Steam jacket filled with treated water, venting and/or refilling is not required
- Welded-in heating elements, (holds vacuum better, won't leak or loose water)
- Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"
- Easily cleaned: kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish
- Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone"
- Accurate, consistent solid state temperature controls (mechanical thermostat not as accurate) - less than ±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C)
- Control panel includes:
- Power ON/OFF switch
- LED indicator for low water
- LED indicator for heat cycle
- Adjustable temperature control dial
- Kettles Markings (KM)
- Measuring Strips (MS)
- Correctional Packages
- Kettle Accessory Kit (KAK)
- Insulated Outer Jacket (IOJ)
- Heat Deflector Shield (HS001)
- Hot & Cold Water Faucet (DPK)
- Voltages other than standard (VOS)
- High Wattage (HW) (see back page)
- 316 Stainless Steel Interior Liner (316G)
- Tri-Basket Strainer Support Systems (TBS)
- 3" diameter Tangent Draw-Off Valve w/Strainer (TD3), for 60 gallon only
Options
Q & A
Videos
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Cleveland Range KEL60SH Specifications
| Installation Type | Floor Model |
|---|---|
| Kettle Jacket | Full |
| Type | Single Kettle |
| Brand | Cleveland Range |
| Kettle Material | Stainless Steel |
| Certifications | CE |
| Power Type | Electric |
| Base | Tri-Leg |
| Capacity | 60 Gallon |
| Heat | Electric |
| Style | Stationary |
| Width (in) | 380 |
| Height (in) | 34.88 |
| Depth (in) | 47.25 |
| Weight | 380 |
Additional Information on Cleveland Range KEL60SH
Items Related to Cleveland Range KEL60SH
Commercial Steam Kettles 504 products
