Cleveland Range KEL25 Kettle

Cleveland Range KEL25 Description

Kettle, electric, 25-gallon capacity, 2/3 steam jacket design, open tri-leg base, faucet bracket, strainer, 50 psi rating, solid state water level control, 2" tangent draw-off, spring-assisted cover, 304 stainless steel construction with 316 series stainless steel liner, flanged feet, IPX6, CE

• 50 psi safety valve
• Faucet mounting bracket
• Water resistant controls, splash-proof construction
• Splash proof element cover with a double gasket seal
• 2˝ diameter tangent draw-off valve with drain strainer
• Typical approvals include UL., CSA, CE, NSF and ASME
• Standard voltage is 208-240 volts, 60 Hz, 3-phase, 3-wire
• 50 psi steam jacket rating for higher cooking temperatures
• Spring-assisted, hinged, rotatable, domed stainless steel cover
• Self-contained, easily installed - needs only an electrical hook-up 
• Solid state water level control (no sight glass gauge to break or leak)
• 1 5/8˝ O.D. tri-leg supports with level adjustable feet for floor bolting
• Steam jacket filled with treated water, venting and/or refilling is not required
• Welded-in heating elements, (holds vacuum better, won't leak or loose water)
• Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"
• Easily cleaned: kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish
• Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone" 
• Accurate, consistent solid state temperature controls (mechanical thermostat not as accurate) - less than ±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C) Control panel includes: Power ON/OFF switch, LED indicator for low water, LED indicator for heat cycle and Adjustable temperature control dial

• Lift-off Covers
• Drain Strainers
• Kettle Markings
• Measuring Strip
• Water Meter Stand 
• Heat Deflector Shield
• Correctional Packages
• Insulated Outer Jacket 
• Automatic Water Meter
• Swing Funnels for drain
• Alternate Mounting Systems
• High Wattages and Special Voltages
• Cooking Baskets and Tri-Basket Supports 
• Hot and Cold Water Faucet with Swing Spout 
• 3" diameter Tangent Draw-Off Valve w/ Strainer 
• Hot and cold or cold only Kettle Filler with 60˝ Hose 
• Type 316 Stainless Steel Kettle Liner for high acid food products 
• Kettle Accessory Kit includes: 24 oz. Ladle, Draw-off Brush, Clean-up Brush, 36˝ Kettle Whip, 36˝ Kettle Brush and 36˝ Kettle Paddle