Beverage Air SPED72HC-10C-6 72'' 6 Drawer Counter Height Refrigerated Sandwich / Salad Prep Table with Cutting Top
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air SPED72HC-10C-6 Specifications
Nominal Width | 72 Inches |
---|---|
Top Type | Cutting Top |
Access Type | Drawers |
Compressor Style | Side / Rear Breathing |
Construction | Stainless and Galvanized Steel |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Made in | USA |
Certifications | cULus |
Capacity | 19 - 32 cu. ft. |
Number of Drawers | 6 |
Sections | 3 |
Style | Counter Height |
Voltage | 115 Volts |
Width (in) | 72 |
Height (in) | 45.13 |
Depth (in) | 38.38 |
Weight | 455.00 |
Additional Information on Beverage Air SPED72HC-10C-6
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air SPED72HC-10C-6 Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air SPED72HC-10C-6 Description
Sandwich Top Refrigerated Counter, three-section, 72"W, 20.0 cu. ft. capacity, (6) drawers (upper & lower pull-out drawers accommodate 6" deep pans), stainless steel top with opening for (10) 1/6 size pans (pans furnished are 4" deep, tops will accommodate 6" deep pans), 17" polyethylene cutting board, stainless steel exterior with galvanized steel back & bottom, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USAThe Beverage Air SPED72HC-10C-6 Elite Series™ Sandwich Top Refrigerated Counter is a prep table offering six refrigerated drawers and ten 1/6 pans for chilled ingredients. Larger items can be stored in the six refrigerated drawers below the worktop that provide a total of 20.0 cu. ft. of storage. Full-size pans up to 6" deep can be stored in these drawers.
Sandwich ingredients and condiments are kept crisp and fresh between 41°F and 33°F inside a cold bunker that is easy to access through its stainless steel lid and hood assembly. The cutting board is extra deep at 17” allowing for more space for prepping more ingredients or assembling sandwiches or salads. The cutting board is secure, so there are no worries of it sliding out, but it can be easily removed for cleaning. Since the chilled pan storage does not run the whole width of the worktop, there is additional space for sauces and ingredients that don’t need to be refrigerated.
The drawers are kept at 36º to 38ºF to maximize the shelf life of food. Telescoping drawer slides made of stainless steel are durable and will provide effortless access to ingredients for many years. A locking mechanism in the drawers prevents them from being inadvertently pulled out of the cabinet.
A self-contained bottom-mounted refrigeration system with a ⅓ HP compressor providing 1594 BTU/hr of cooling capacity provides efficient cooling. Eco-friendly R290 hydrocarbon refrigerant that meets all environmental regulations is used. Automatic defrosting is accomplished with a non-electric system.
This unit is configured to use standard 115v/60/1-ph power at 5.4 amps. An 8’ power cable with an integrated NEMA 5-15P plug comes standard.
Keep your produce fresh, crisp, and cool during food prep with this Beverage Air SPED72HC-10C-6 Elite Series? Sandwich Top Refrigerated Counter. This worktable is 41.69 inches tall, 72 inches wide, and 36 inches deep.Beverage Air SPED72HC-10C-6 Accessories
Beverage Air SPED72HC-10C-6 Reviews
There are no reviews yet for this product.