Beverage Air SPE72HC-08C 72'' 3 Door Counter Height Refrigerated Sandwich / Salad Prep Table with Cutting Top
Calculate
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air SPE72HC-08C Specifications
| Nominal Width | 72 Inches |
|---|---|
| Top Type | Cutting Top |
| Access Type | Doors |
| Compressor Style | Side / Rear Breathing |
| Construction | Stainless and Galvanized Steel |
| Brand | Beverage Air |
| Refrigerant Type | R-290 |
| Made in | USA |
| Certifications | cULus |
| Number of Doors | 3 |
| Capacity | 19 - 32 cu. ft. |
| Sections | 3 |
| Style | Counter Height |
| Voltage | 115 Volts |
| Width (in) | 72 |
| Height (in) | 45 |
| Depth (in) | 38.38 |
| Weight | 396.00 |
Additional Information on Beverage Air SPE72HC-08C
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air SPE72HC-08C Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air SPE72HC-08C Description
Sandwich Top Refrigerated Counter, three-section, 72"W, 20.02 cu. ft. capacity, (3) doors, stainless steel top with opening for (8) 1/6 size pans, 17" cutting board & available counter space, (6) shelves, stainless steel exterior top, front, sides & doors, galvanized steel exterior bottom and back, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4" deep, tops will accommodate 6" deep pans), R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USAThe SPE72HC-08C Elite Series™ Sandwich Top Refrigerated Counter from Beverage Air is a twin-door prep table with an extended depth cutting board work area and cold ingredient storage for eight ⅙ polycarbonate pans that are 4” deep. The reach-in refrigeration sections below the worktop offer a total of 20.02 cu. ft. of storage space.
Each reach-in cabinet has two epoxy-coated steel wire shelves to make the best use of the space and organize items. The liners of these refrigerators are made from corrosion-resistant aluminum that is easy to clean and maintain. The stainless steel doors lock in the cold air with snap-in gaskets that can be removed easily for maintenance or cleaning. The interior of each refrigerator is subjected to enhanced airflow which keeps the temperature between 36º and 38ºF.
Sandwich ingredients and condiments are kept nice and cool and easily accessed under a stainless steel lid and hood assembly. The extended cutting board is 17” deep providing more than enough room to work on sandwiches or prep ingredients. The cutting board is held in place but easy to remove for cleaning. The refrigerated ingredient pan area occupies less than half of the countertop leaving lots of room for other ingredients, sauces, and condiments that don’t need refrigeration.
The self-contained refrigeration system at the bottom of this prep counter has an efficient ⅓ HP compressor with 1549 BTU/hr of cooling capacity. Cooling is efficiently provided with eco-friendly R290 hydrocarbon refrigerant that meets all environmental regulations. Automatic defrosting is provided with a non-electric system.
This unit is configured to use standard 115v/60/1-ph power and comes with an eight-foot power cord with a NEMA 5-15P plug set.
Beverage Air SPE72HC-08C Accessories
Beverage Air SPE72HC-08C Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Beverage Air SPE72HC-08C to Other Products
Items Related to Beverage Air SPE72HC-08C
