Beverage Air BB78HC-1-S Silver 3 Solid Door Refrigerated Back Bar Storage Cabinet, 115 Volts
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air BB78HC-1-S Specifications
Number of Kegs | 4 Kegs |
---|---|
Interior Construction | Shelves |
Construction | Stainless and Galvanized Steel |
Cabinet Type | Storage Cabinets |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Made in | USA |
Certifications | cULus |
Door Style | Swing |
Number of Doors | 3 |
Control Type | Manual |
Capacity | 33.59 cu. ft. |
Color | Stainless Steel |
Door Type | Solid |
Sections | 3 |
Voltage | 115 Volts |
Width (in) | 79 |
Height (in) | 37.25 |
Depth (in) | 29.13 |
Weight | 444.00 |
Additional Information on Beverage Air BB78HC-1-S
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air BB78HC-1-S Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air BB78HC-1-S Description
If your establishment needs reliable back bar refrigeration the Beverage Air BB78HC-1-S Refrigerated Back Bar Storage Cabinet is an easy pick. The stainless steel finish on its front and doors will stand up to daily use in a commercial environment. The interior of this back bar refrigerator has 33.59 cu. ft. of space that can hold four ½ kegs.
The self-closing door comes standard with a lock for security. Inside the reach-in section are two epoxy-coated wire shelves to organize the contents. The interior comes with a total of six epoxy-coated shelves to organize items and maximize the use of available space in the open food certified stainless steel interior. The LED interior lighting is much more reliable than other lighting solutions while providing plenty of light. Products inside this back bar refrigerator can be quickly cooled with the balanced forced-air refrigeration system.
Cooling is provided by a side-mounted refrigeration system utilizing a ⅓ HP compressor that provides 2392 BTU/hr of cooling. To best fit your establishment the refrigeration system can be ordered on either side. The fully electronic controls keep the interior between 36ºF and 38ºF as efficiently as possible while an epoxy-coated evaporator makes sure heat is exchanged reliably with minimal service. The non-electric automatic defrost cycle keeps the unit running efficiently while keeping downtime to a minimum. R290 refrigerant is eco-friendly and provides efficient cooling while meeting all regulations.
Power is supplied by a factory-installed 8-foot power cable with a NEMA 5-15P plug set for use with standard 115v/60/1-ph at 5.5 amps.
Make clutter a thing of the past when you install the spacious Beverage Air BB78HC-1-S Refrigerated Back Bar Storage Cabinet. This backbar storage cabinet is 37.25 inches tall, 79 inches wide, and 28.19 inches deep.
- Cabinet Construction
- LED lighting
- Self-closing doors
- Stainless steel top
- Full electronic control
- Black or stainless steel exterior
- Heavy duty stainless steel floor
- Stay-open feature & lock standard
- Two (2) epoxy coated shelves per section, standard
- Magnetic door gaskets provide positive door sealing
- Interior construction utilizes galvanized steel on walls and ceiling
- Compressor available on left or right, specify at time of unit order
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Balanced forced-air refrigeration system provides rapid chilling of product
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Glass door
- Foot pedal door opener
- Food rated models available
- 3”-6” casters or 6” black legs
- Wine model (40°-60° models)
- Electrical Connection
- Units pre-wired at factory and include 8’ long cord and plug set.
Beverage Air BB78HC-1-S Accessories
Beverage Air BB78HC-1-S Reviews
There are no reviews yet for this product.