Vulcan 4VK45CF PowerFry5™ (4) 45-50 lb. Fryers Gas Floor Fryer with Computer Controls and KleenScreen PLUS® Filtration System, 120 Volts - 280,000 BTU
Chat Now
Vulcan 4VK45CF Specifications
Control Type | Computer |
---|---|
Filtration System | KleenScreen PLUS® Filtration System |
Series | PowerFry5™ |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Battery | 4 |
Basket | Twin |
Basket Lifts | No |
BTU | 280,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Computer |
Capacity | (4) 45-50 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 62 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 871.00 |
Additional Information on Vulcan 4VK45CF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 4VK45CF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 4VK45CF Description
If your commercial kitchen needs to do a lot of serious deep-frying while saving money on operational costs, a four-fryer system with filtration like the Vulcan 4VK45CF PowerFry5™ Fryer is a great investment. These Commercial Deep Fryers are ENERGYSTAR® qualified and one of the most energy-efficient units that you can buy. Vulcan’s range of Floor Model Gas Fryers are chocked full of features that make them more reliable, easier to use, and easier to maintain based on years of use and development.
Most tube-fired fryers use multiple burners each in their own heat exchange tube. This evenly distributes heat but a lot of heat is wasted and is vented from the fryer immediately. Vulcan’s FivePass™ heat transfer takes a different approach, a single burner that branches off into two heat exchange tubes that bend back and forth to extend the length of the heat exchange tubes to heat oil evenly while harnessing more of the heat from the burned gas that would otherwise be unused. Thanks to the revolutionary design, this fryer has 78% thermal efficiency and 68% cooking efficiency and while idle it only consumes 4,251 BTU/hr to maintain the cooking temperature. To prevent the oil from breaking down prematurely the SoftStart™ ignition system only uses 35,000 BTU/hr at startup to gently get oil to temperature.
The computer controls on this fryer make it extremely easy to get consistent results with up to 10 menu items. The system is easy to update with a USB drive making updating and tweaking settings simple to deploy to multiple fryers. The product name and cook times are shown on the digital display letting users know that they have selected the right menu item. The temperature can be accurately controlled between 200° and 390°F with fast recovery. This fryer’s electronic ignition and three melt modes make it easy to use.
This fryer system’s KleenScreen PLUS® features a stainless steel mesh filter to remove most particles, but for more thorough filtration you can order optional KleenScreen PLUS® envelopes that will filter out particulates down to .5 microns. The filtration system is housed inside an 18 gauge stainless steel filter vessel. Oil is circulated at a rate of 8 GPM by a ⅓ HP motor to quickly filter oil while keeping downtime to a minimum.
The stainless steel construction of the cabinet and fry tank make this fryer durable and easy to clean. Moving this fryer around is easy with the adjustable 6” casters which also make keeping it level simple. Twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod are also included for convenience.
This fryer requires a total input of 280,000 BTU/hr and comes with a NEMA 5-15P cord and plug.
- Hi-limit shut-off.
- 70,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,251 BTU/hr. to save energy.
- Stainless steel fry tank, 45 - 50 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency.
- FRYMATE-VX15 add-on frymate.
- Set of twin baskets – 6 1⁄2"w x 13 1⁄4"d x 6"h.
- 3⁄4" Flexible gas hose with quick disconnect.
- Single large basket – 13"w x 13 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover – doubles as a work surface top.
- Connecting Kit(s) – Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
- 15 1⁄2"w x 34 3⁄8"d x 47 1⁄8"h. Working height 36 1⁄4".
- Natural Gas.
- Propane Gas.
- The 1VK45 Series fryer does not require any special adjustments for varying altitudes ranging from 0 - 10,000 feet for either Natural or Propane gas.
45 - 50 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK45A) (1VK45D) (1VK45C). 70,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,251 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 4VK45CF Accessories
Vulcan 4VK45CF Reviews
There are no reviews yet for this product.