Vulcan 4VK45AF PowerFry5™ (4) 45-50 lb. Fryers Gas Floor Fryer with Solid State Controls and KleenScreen PLUS® Filtration System, 120 Volts - 280,000 BTU

If your commercial kitchen needs to do a lot of serious deep-frying while saving money on operational costs, a quad fryer system with filtration like the Vulcan 4VK45AF PowerFry5™ Fryer is a great investment. The Commercial Deep Fryers in this package aren’t just ENERGYSTAR® qualified, they are some of the most efficient fryers available on the market. The variety of Floor Model Gas Fryers offered by Vulcan are designed from the ground up to provide operators with a wide range of options to best fit their needs.

Gas-heated deep fryers commonly use multiple burners with heat exchange tubes to evenly transfer heat to the oil. Vulcan’s FivePass™ heat transfer technology breaks the mold and uses a single large burner that branches off into two symmetrical heat tubes with multiple bends to transfer as much heat as possible before being expelled from the fryer. The innovative design of the burner and heat exchange system yields this fryer with 78% thermal efficiency and 68% cooking efficiency, which is leagues ahead of other fryers on the market. When idling, this fryer only consumes 4,251 BTU/hr of gas to maintain the cooking temperature. To reduce thermal shock to the oil at startup, the SoftStart™ ignition system uses 35,000 BTU/hr of gas and gradually applies heat to the oil which will prolong its life.

This fryer uses a simple to use solid stat analog knob located behind the door to control the temperature between 200° and 390°F. To make using this fryer simple it features electronic ignition and fat melt modes.

This fryer system’s KleenScreen PLUS® filtration system uses a stainless steel mesh to remove most particles. The filtration system is protected by a filter vessel made from 18 gauge stainless steel. If you need to filter out particles down to .5 microns, optional KleenScreen PLUS® filter envelopes can be ordered. Filtration is done quickly at a rate of 8 GPM thanks to a ⅓ HP pump motor.

Cleaning and maintenance of the fryer are easy with stainless steel construction of the cabinet and fry tank. This fryer comes standard with adjustable 6” casters to make it easy to move around for cleaning and maintenance. It also comes with a clean-out rod, twin fry baskets with plastic coated handles, and a tank brush.

A NEMA 5-15P cord and plug are included to connect the fryer to a 120-volt outlet and in total 280,000 BTU/hr of gas input is required.