Vulcan 1VK65D PowerFry5 51 - 90 lb. Gas Floor Model Full Pot Fryer with Digital Controls - 80,000 BTU
Chat Now
Vulcan 1VK65D Specifications
Total BTU | 80,000 BTU |
---|---|
Control Type | Digital |
Installation Type | Freestanding |
Series | PowerFry5™ |
Construction | Stainless Steel |
Burner Style | Tube |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Power Type | Gas |
Model | Free Standing |
Basket | Twin |
Basket Lifts | No |
BTU | 80,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Solid State Digital |
Capacity | 51 - 90 lb. |
Heat | Natural or Propane Gas |
Width (in) | 21 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 237.00 |
Additional Information on Vulcan 1VK65D
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 1VK65D Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 1VK65D Description
If you’re looking for a fryer with advanced technology unlike any other fryer on the market, the 1VK65D PowerFry5™ Fryer from Vulcan is a great choice that holds 65-70 lbs of oil. This fryer is ENERGYSTAR® qualified and is one of the most efficient Commercial Deep Fryers they have tested. The Floor Model Gas Fryers in Vulcan’s lineup have been thoroughly developed to meet the needs of a variety of use cases to provide operators with the right piece of equipment for their needs.
Gas-fired deep fryers have essentially used the same technology for the better part of a century, multiple burners each in their own heat exchange tube to apply heat to oil and expel the burned gas after a single pass. Vulcan’s FivePass™, as its name implies, uses a single large burner and two sets of heat exchange tubes with multiple bends to let the heat transfer to the oil evenly over five passes. This extracts as much heat from the burned gas as possible before it exits the fryer. The innovative design of the burner and heat exchange system yields this fryer with 78% thermal efficiency and 68% cooking efficiency, which is leagues ahead of other fryers on the market. When idling, this fryer only consumes 4,802 BTU/hr of gas to maintain the cooking temperature. To reduce thermal shock to the oil at startup, the SoftStart™ ignition system uses 35,000 BTU/hr of gas and gradually applies heat to the oil which will prolong its life.
The digital controls on this fryer displays the temperature accurately in either Celcius or Fahrenheit and can be from 200°F to 390°F (93°C to 199°C). Two count-down timers can cook with either compensating time or actual time. Three melt modes, auto-boil-out mode, and electronic ignition make this fryer easy to use.
The cabinet and fry tank of this fryer is made from stainless steel for durability ad ease of maintenance. The 6” casters included with this fryer make it easy to move around for maintenance and cleaning. The casters are also adjustable to make sure the fryer is always level. A tank brush, twin fry baskets with plastic coated handles, and a clean-out rod are also included.
This fryer uses 120v power and comes with a NEMA 5-15P cord and plug and has a total gas input of 80,000 BTU/hr.
Standard Features:
- Hi-limit shut-off.
- 80,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,802 BTU/hr. to save energy.
- Stainless steel fry tank, 65 - 70 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency.
- FRYMATE-VX15 add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 9 1⁄4"w x 13 1⁄4"d x 6"h.
- 10" high stainless steel removable splash guard.
- Single large basket - 18 3⁄4"w x 13 1⁄4"d x 5 1⁄2"h.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
65 - 70 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK65A) (1VK65D) (1VK65C). 80,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,802 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 1VK65D Accessories
Vulcan 1VK65D Reviews
There are no reviews yet for this product.