Vulcan 1VK45D PowerFry5 15 - 50 lb. Gas Floor Model Full Pot Fryer with Digital Controls - 70,000 BTU
Chat Now
Vulcan 1VK45D Specifications
Total BTU | 70,000 BTU |
---|---|
Control Type | Digital |
Installation Type | Freestanding |
Series | PowerFry5™ |
Construction | Stainless Steel |
Burner Style | Tube |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Power Type | Gas |
Model | Free Standing |
Basket | Twin |
Basket Lifts | No |
BTU | 70,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Solid State Digital |
Capacity | 15 - 50 lb. |
Heat | Natural or Propane Gas |
Width (in) | 15.5 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 201.00 |
Additional Information on Vulcan 1VK45D
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 1VK45D Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 1VK45D Description
Commercial kitchens that do a lot of deep-frying need an efficient and reliable fryer like the 1VK45D PowerFry5™ Fryer from Vulcan. This fryer holds 45-50 lbs of oil to fit your kitchen’s demand. This fryer isn’t just ENERGYSTAR® qualified, it’s one of the most efficient Commercial Deep Fryers on the market. Vulcan’s range of Floor Model Gas Fryers are chocked full of features that make them more reliable, easier to use, and easier to maintain based on years of use and development.
Vulcan’s FivePass™ heat transfer system is a game-changer. Unlike other fryers with multiple straight heat exchange tubes each with a burner, Vulcan’s design uses a single large burner connected to heat exchange tubes that bend back and forth providing more surface area to transfer heat to oil more effectively. In effect, this reduces the amount of gas necessary to heat the oil effectively. The design yields this fryer with 78% thermal efficiency and 68% cooking efficiency. To maintain the oil temperature at idle this fryer only uses 4,251 BTU/hr and to extend the life of oil the SoftStart™ ignition system lowers the burn rate to 35,000 BTU/hr to gradually apply heat.
The digital controls on this fryer feature a digital display that shows the temperature accurately and the cooking temperature can be set between 200° and 390°F. Two count-down timers allow for cooking with compensating time or actual time. Thanks to auto boil-out mode, three melt modes and electronic ignition, this fryer is extremely easy to use.
This fryer is designed to stand up to the rigors of daily commercial use with a stainless steel cabinet and fry tank. Moving this fryer around is easy with the adjustable 6” casters which also make keeping it level simple. Twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod are also included for convenience.
A NEMA 5-15P cord and plug are included to connect the fryer to a 120-volt outlet and in total 70,000 BTU/hr of gas input is required.
Standard Features:
- Hi-limit shut-off.
- 70,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,251 BTU/hr. to save energy.
- Stainless steel fry tank, 45 - 50 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency.
- FRYMATE-VX15 add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 6 1⁄2"w x 13 1⁄4"d x 6"h.
- Single large basket - 13"w x 13 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
45 - 50 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK45A) (1VK45D) (1VK45C). 70,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,251 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 1VK45D Accessories
Vulcan 1VK45D Reviews
There are no reviews yet for this product.