Vulcan 1TR85A PowerFry3 51 - 90 lb. Gas Floor Model Full Pot Fryer with Solid State Controls - 90,000 BTU
Chat Now
Vulcan 1TR85A Specifications
Total BTU | 90,000 BTU |
---|---|
Installation Type | Freestanding |
Series | PowerFry3™ |
Control Type | Solid State |
Construction | Stainless Steel |
Burner Style | Tube |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Power Type | Gas |
Model | Free Standing |
Basket | Twin |
Basket Lifts | No |
BTU | 90,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Solid State Analog Knob |
Capacity | 51 - 90 lb. |
Heat | Natural or Propane Gas |
Width (in) | 21 |
Height (in) | 47.25 |
Depth (in) | 34.38 |
Weight | 267.00 |
Additional Information on Vulcan 1TR85A
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 1TR85A Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 1TR85A Description
Commercial kitchens that do a lot of deep-frying need an efficient and reliable fryer like the 1TR85A PowerFry3™ Fryer from Vulcan. This fryer holds 85-90 lbs of oil to fit your kitchen’s demand. This fryer is ENERGYSTAR® qualified and one of the most energy-efficient units that you can buy.
Vulcan’s ThreePass™ heat transfer system is an ingenious piece of engineering that looks like it belongs on a racecar. This heat transfer system uses heat exchange tubes with two bends that extend the surface area of the gas tubes as burning gas moves through it. This allows it to use more of the heat that would otherwise be expelled by other Commercial Deep Fryers. Thanks to the revolutionary design, this fryer has 72% thermal efficiency and 60% cooking efficiency and while idle it only consumes 5,575 BTU/hr to maintain the cooking temperature. To prevent the oil from breaking down prematurely the SoftStart™ ignition system only uses 45,000 BTU/hr at startup to gently get oil to temperature.
To easily set the frying temperature, this fryer has a simple solid state analog knob behind the door with a range from 200° to 390°F. For ease of use, this fryer has an electronic ignition and selectable fat melt modes.
The fry tank and cabinet are made from durable stainless steel to make sure this fryer stands up to daily use without issue. Included with this fryer are adjustable 6” casters, a clean-out rod, tank brush, and twin fry baskets with plastic coated handles.
To power this fryer it needs 90,000 BTU/hr of gas input, and a 120v NEMA 5-15P cord and plug are included.
Standard Features:
- Hi-limit shut-off.
- 90,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 5,575 BTU/hr. to save energy.
- Stainless steel fry tank, 85 - 90 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy Efficient ThreePass™ heat transfer system yielding 60.0% cooking efficiency and 72% Thermal Efficiency. ENERGY STAR® certified.
- FRYMATE-VX21S add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 8 3⁄4"w x 16 3⁄4"d x 6"h.
- 10" high stainless steel removable splash guard.
- Single large basket - 18 3⁄4"w x 17 1⁄4"d x 5 1⁄2"h.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 1TR85A Accessories
Vulcan 1TR85A Reviews
There are no reviews yet for this product.