Traulsen UST3212-D 32'' 2 Drawer Counter Height Refrigerated Sandwich / Salad Prep Table with Mega Top

Standard Features:

Traulsen's durable, high-performance sandwich prep tables provide a high-quality/high-value alternative to the all too common commodity types in today's market. Any comparison between prep tables should start with performance, and Traulsen really does the job. Not only do they all meet the NSF 7 Standard, but do so under real world conditions, even when using 6" deep top pans! A Traulsen exclusive. Truly front-breathing, their design allows for "zero-clearance" installation. As a result, they can be placed right up against the backwall and alongside other kitchen equipment, saving valuable floor space. 

• 8' Cord & Plug Attached
• Interior-Mounted Thermometer
• Five-Year Compressor Warranty
• Magnetic Snap-In Drawer Gaskets
• Three-Year Parts And Labor Warranty
• 16-Gauge Stainless Steel Drawer with Slide
• Environmentally Friendly R-134a Refrigerant
• Self-Closing Drawers with Stay-Open Feature
• Full-Length Drawer Handle with Gasket Guard
• Automatic Non-Electric Condensate Evaporator
• Reversible, Full-Length White Nylon Cutting Board
• Front-Breathing Self-Contained Refrigeration System
• Durable, Corrosion-Resistant Anodized Aluminum Interior
• High-Quality Stainless Steel Exterior Top, Sides & Drawer(s)
• Stainless Steel Insulated Top Pan Lid with Two Open Positions
• Set of Four (4) 6" High Adjustable Legs (6 for 60" & 72" models)
• Reinforced Top Pan Ledge (holds pans securely level, year after year)
• Provides NSF Standard 7 Performance, Even When Using 6" Deep Top Pans - A Traulsen Exclusive
• Top Cut-Outs Accommodate Sixth Size Pans (divider bars and 4" deep plastic sixth size pans provided)
• Standard Work Height 36-1/4" (see "optional accessory kits for lower height casters to meet ADA requirements or provide lower work heights).

Optional Accessory Kits: 

• CASTER SET2IN (four 2-1/2" high casters for 27" models)
• CASTER 5SET6 (six 6" high casters for 60" & 72" models)
• CASTER 5SET4 (four 6" high casters for 27" & 32" models)
• CASTER 60SET3 (six 4" high casters for 60" & 72" models)
• CASTER SET4IN (four 4" high casters for 27" & 32" models)
• CASTER SET4 (six 3-1/2" high casters for 60" & 72" models)
• CASTER SET3IN (four 3-1/2" high casters for 27" & 32"models)
• **All optional accessory kits are shipped separately for field installation.**

Factory Installed Options: 

• Stainless Steel Finished Back

Specifications:
Construction, Hardware, and Insulation 

• Cabinet exterior front, one-piece sides, pan lid, and drawers are constructed of 22-gauge stainless steel. Cabinet interior is constructed of anodized aluminum. The exterior cabinet back and bottom are constructed of galvanized steel. The cabinet is insulated with an average of 2" thick high-density, non-CFC, foamed-in-place polyurethane. A 3/4" thick, full-length, reversible white nylon cutting board is supplied standard. 

Top Pans & Cover 

• Each model is supplied standard with its full complement of 4" deep plastic 1/6 size pans and stainless steel pan dividers. The insulated lift-up pan cover is constructed of stainless steel and is easily removable for cleaning. Part No. TR35934 (revised 1/13) Specifications NOTES: - Overall depth figure includes standard cutting board. - Height shown when mounted on 6" high legs or casters. - Based on a 90 degree F ambient and 20 degree F evaporator. - When ordering please specify: Voltage, Optional accessories and any additional warranties. - Continued product development may necessitate specification changes without notice. 

Refrigeration System 

• A balanced, rear-mounted, front-breathing, self-contained refrigeration system using R-134a refrigerant is provided. It features a capillary tube metering device, an air-cooled hermetic compressor, a forced air evaporator coil, and a non-electric condensate evaporator. An 8' cord and plug is provided. Standard operating temperature of the refrigerated base is 34 to 38°F. 

Drawers 

• They are constructed using 16-gauge stainless steel drawer slides and 1-5/16" diameter stainless steel rollers. Drawers include both a self-closing and stay-open feature. 

Warranties 

• Both a three-year parts and labor warranty and a five-year compressor warranty (self-contained models only) are provided standard.