Traulsen AHT226WUT-HHG 58'' 40.8 cu. ft. Top Mounted 2 Section Glass Half Door Reach-In Refrigerator
MPN#: AHT226WUT-HHG
Free Freight?
Quick Ship
$20,479.14 /
Contact us for your price
Call 1 (800) 555-0666
Mon-Fri 9AM-8PM, Sun 12-6PM ET
Mon-Fri 9AM-8PM, Sun 12-6PM ET
Why don't we show the price for this item?
Calculate
Product Protection
Starting at
- 2023 model, meets the newest EPA and DOE codes.
- Usually ships in 4-6 weeks
Traulsen AHT226WUT-HHG Specifications
| Amps | 10.3 Amps |
|---|---|
| Refrigerator Capacity | 40.8 cu. ft. |
| Door Size | Half |
| Hinge Location | Left/Right |
| Construction | Stainless Steel and Aluminum |
| Half Doors | Yes |
| Brand | Traulsen |
| Refrigerant Type | R-134A |
| Certifications | ETL |
| Split Doors | Yes |
| Interior Finish | Aluminum |
| Number of Doors | 4 |
| Number of Shelves | 6 |
| Type | Reach In |
| Refrigeration System | Self-contained |
| Capacity | 31 - 46 cu. ft. |
| Compressor Location | Top Mounted |
| Door Type | Glass |
| Door Design | Swing |
| Material | Aluminium |
| Sections | 2 |
| Temperature Range | 34 - 38 Degrees F |
| Voltage | 115 Volts |
| Width (in) | 58 |
| Height (in) | 83.25 |
| Depth (in) | 28.94 |
| Weight | 620 |
Additional Information on Traulsen AHT226WUT-HHG
warrantysheet.pdf 
accessorykits.pdf 
traulsensmartconnect.pdf 
remotemodels.pdf 
sellsheet.pdf 
exteriorlaminates.pdf 
quick-start-guide.pdf 
owner-s-manual.pdf 
shipping-dimensions-product-weights.pdf 
traulsen-aht226wut-hhg.specsheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Traulsen AHT226WUT-HHG Certifications
ETL
The ETL Mark is proof of product compliance to North American safety standards.
ETL-Sanitation
This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.
Traulsen AHT226WUT-HHG Description
Spec-Line Refrigerator, Reach-in Display, two-section, 40.8 cu. ft., self-contained refrigeration, StayClear™ Condenser, stainless steel exterior, aluminum interior, shallow depth, wide half-height glass doors, interior lights, (3) adjustable wire shelves per section, microprocessor controls, 6" adjustable stainless steel legs, 1/2 HP, cETLus, ETL-Sanitation
This two-section reach-in refrigerator from Traulsen has a storage capacity of 40.8 cubic feet, providing plenty of space for all your chilled merchandise. The stainless steel exterior creates a durable, corrosion-resistant piece of equipment while the half-height glass doors showcase the products inside beautifully with the help of the interior lights. The shallower depth makes this reach-in refrigerator easier to fit in smaller spaces. With each section three supplied with (3) adjustable wire shelves, you can customize the space to fit the products. The condenser on this unit stays in tip-top condition, thanks to the unique StayClear technology.
When it comes to product storage, you need the best commercial refrigerators and freezers. Check out our full collection to find the most suitable unit for your operation.
When it comes to product storage, you need the best commercial refrigerators and freezers. Check out our full collection to find the most suitable unit for your operation.
Standard Features:
The R & A Series represent Traulsen's Top-of-the-Line product offering. These 26" Deep reach-in refrigerator models are equipped with hinged glass doors in order to maximize product visibility. Each is supplied standard with such high-quality features as balanced refrigeration systems, microprocessor controls, communications ability, and stainless steel exteriors. Additionally, they offer the widest range of optional accessories to choose from, and can be specified for use with many different applications, including: Foodservice, Correctional, Institutional, Export, etc.
Construction, Hardware, and Insulation
- Biased Return Air Duct
- 9' Cord & Plug Attached
- Stainless Steel Breaker Caps
- Five Year Compressor Warranty
- Scroll Blower Type Evaporator Fan
- Guaranteed For Life Cam-Lift Hinges
- Three Year Parts And Labor Warranty
- Stainless Steel Vertical Door Handle(s)
- Incandescent Lights With Exterior Switch
- R-Series: Stainless Steel Exterior & Interior
- Stainless Steel One-Piece Louver Assembly
- Magnetic Snap-In EZ-Clean Door Gasket(s)
- Thermostatic Expansion Valve Metering Device
- Automatic Non-Electric Condensate Evaporator
- INTELA-TRAUL® Microprocessor Control System
- Full or Half Length Hinged Glass Doors With Locks
- Controllable Anti-Condensate Door Perimeter Heaters
- Set of Four (4) 6" High Adjustable Stainless Steel Legs
- Self-Closing Doors With Stay Open Feature At 120 Degrees
- A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
- Balanced, Self-Contained Refrigeration System Using R-134a
- Standard Door Hinging: 126W = Right, 226W = Left/Right, (other hingings available)
- Three Adjustable Wire Shelves Per Section, Supported On Shelf Pins (installed at the factory)
- Fluorescent Lights
- Additional Wire Shelves
- Stainless Steel Shelves
- Export 220/50/1 Voltage
- Re-Hinging Feature For Door(s)
- Kool Klad Exterior Laminate Decor
- Set of Four (4) 6" High Casters In Lieu of Legs
- 4-1/2" High Stainless Steel Base In Lieu of Legs
- Stainless Steel Finished Back With Rear Louvers
- 208/115/60/1 Voltage In Lieu Of Standard 115/60/1
- Set of Four (4) 4-5/8" High Casters In Lieu of Legs
- Remote Monitoring (monitoring supplied by E-Control)
- Remote Applications (see spec sheet TR35837 for details)
- 6" High Stainless Steel Kickplate (for use with standard legs)
Construction, Hardware, and Insulation
- Cabinet exterior front, one-piece sides, and louver assembly are constructed of 20 gauge stainless steel with a #4 finish. Cabinet interior is constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back, and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with a stay-open feature at 120 degrees. An external switch is provided to activate the interior incandescent lighting. Gasket profile and Santoprene® material simplify cleaning and increase overall gasket life. Anti condensate heaters are located behind each door opening. The cabinet is insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
- A top-mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one-piece louver assembly. It features an easy-to-clean front-facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top-mounted non-electric condensate evaporator. Biased return air duct protects against the introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug are provided. Standard operating temperature is 34 to 38°F.
- The easy to use water-resistant INTELA-TRAUL® microprocessor control system is supplied standard. RS485 data port enables data communications for remote monitoring such as NAFEM Data Protocol, E-Control Systems®, and others. It includes a 3-Digit LED Display and Fahrenheit or Celsius Temperature Scale Display Capability, In addition, it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.
- Standard interior arrangements include three (3) wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Standard interior arrangements are installed at the factory.
- Both a three-year parts and labor warranty and a five-year compressor warranty (self-contained models only) are provided standard.
| Features | |
|---|---|
| Standard Product Features: | • R-Series: Stainless Steel Exterior & Interior • A-Series: Stainless Steel Exterior/Anodized Aluminum Interior • INTELA-TRAUL® Microprocessor Control System • Balanced, Self-Contained Refrigeration System Using R-134a • Scroll Blower Type Evaporator Fan • Biased Return Air Duct • Full or Half Length Hinged Glass Doors With Locks • Self-Closing Doors With Stay Open Feature At 120 Degrees • Guaranteed For Life Cam-Lift Hinges • Stainless Steel Vertical Door Handle(s) • Standard Door Hinging: 126W = Right, 226W = Left/Right, (other hingings available) • Incandescent Lights With Exterior Switch • Stainless Steel Breaker Caps • Three Adjustable Wire Shelves Per Section, Supported On Shelf Pins (installed at the factory) • Automatic Non-Electric Condensate Evaporator • Magnetic Snap-In EZ-Clean Door Gasket(s) • Controllable Anti-Condensate Door Perimeter Heaters • Thermostatic Expansion Valve Metering Device • Stainless Steel One-Piece Louver Assembly • 9' Cord & Plug Attached • Set of Four (4) 6" High Adjustable Stainless Steel Legs • Three Year Parts And Labor Warranty • Five Year Compressor Warranty |
| Construction, Hardware and Insulation: | Cabinet exterior front, one piece sides and louver assembly are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior is constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. An external switch is provided to activate the interior incandescent lighting. Gasket profile and Santoprene® material simplify cleaning and increase overall gasket life. Anti condensate heaters are located behind each door opening. The cabinet is insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane. |
| Warranties: | Both a three year parts and labor warranty and a five year compressor warranty (self-contained models only) are provided standard. |
| Refrigeration System: | A top mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F. |
| Controller: | The easy to use water resistant INTELA-TRAUL® microprocessor control system is supplied standard. RS485 data port enables data communications for remote monitoring such as NAFEM Data Protocol, E-Control Systems® and others. It includes a 3-Digit LED Display and Fahrenheit or Celsius Temperature Scale Display Capability, In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption. |
| Options & Accessories: | • Stainless Steel Finished Back With Rear Louvers • Fluorescent Lights • Re-Hinging Feature For Door(s) • Additional Wire Shelves • Stainless Steel Shelves • Export 220/50/1 Voltage • 208/115/60/1 Voltage In Lieu Of Standard 115/60/1 • Kool Klad Exterior Laminate Decor • Set of Four (4) 6" High Casters In Lieu of Legs • Set of Four (4) 4-5/8" High Casters In Lieu of Legs • 4-1/2" High Stainless Steel Base In Lieu of Legs • 6" High Stainless Steel Kickplate (for use with standard legs) • Remote Applications (see spec sheet TR35837 for details) • Remote Monitoring (monitoring supplied by E-Control) |
| Interior: | Standard interior arrangements include three (3) wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Standard interior arrangements are installed at the factory |
Traulsen AHT226WUT-HHG Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Traulsen AHT226WUT-HHG to Other Products
Rating
Price
Width (in)
Depth (in)
Height (in)
Refrigerator Capacity
Compressor Location
Sections
Number of Doors
Door Type
Door Size
Price
$20,479.14 58
28.94
83.25
40.8 cu. ft.
Top Mounted
2
4
Glass
Half
Price
$20,466.77 58
35.5
83.25
51.6 cu. ft.
Top Mounted
2
2
Glass
Full
Price
$20,527.65 58
29
83.25
40.8 cu. ft.
Top Mounted
2
2
Solid
Full
Price
$20,539.53 26.38
35
83.25
21.9 cu. ft.
Top Mounted
1
1
Solid
Full
Price
$20,539.53 26.38
35
83.25
21.9 cu. ft.
Top Mounted
1
1
Solid
Full
Price
$20,405.88 48
35
83.25
42 cu. ft.
Top Mounted
2
2
Glass
Full
Items Related to Traulsen AHT226WUT-HHG
Commercial Cold Food Pans 2 products
Commercial Food Pans 1675 products
Hot / Cold Drop-In Food Well Units 216 products
Reach-In Refrigerators 1258 products
