A top mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F

Standard Product Features

• R-Series: Stainless Steel Exterior & Interior • A-Series: Stainless Steel Exterior/Anodized Aluminum Interior • INTELA-TRAUL® Microprocessor Control System • Balanced, Self-Contained Refrigeration System Using R-134a • Scroll Blower Type Evaporator Fan • Biased Return Air Duct • Full or Half Length Stainless Steel Doors With Locks • Self-Closing Doors With Stay Open Feature At 120 Degrees • Guaranteed For Life Cam-Lift Hinges • Guaranteed For Life Horizontal Work Flow Door Handle • Standard Door Hinging: 132W = Right, 232W = Left/Right, 332W = Left/Right/Right (other hingings available) • Automatically Activated Incandescent Lights • Stainless Steel Breaker Caps • Three Adjustable Wire Shelves Per Section, Supported On Shelf Pins (installed at the factory) • Automatic Non-Electric Condensate Evaporator • Magnetic Snap-In Door Gaskets • Gasket Protecting Metal Door Liner • Controllable Anti-Condensate Door Perimeter Heaters • Thermostatic Expansion Valve Metering Device • Stainless Steel One-Piece Louver Assembly • 9' Cord & Plug Attached • Set of Four (4) 6" High Adjustable Stainless Steel Legs • One Year Parts And Labor Warranty • Two Year Control Warranty (parts and labor) • Five Year Compressor Warranty

Options & Accessories

• Stainless Steel Finished Back With Rear Louvers • No. 1 Type Tray Slides To Accommodate either (1) 18" x 26" or (2) 14" x 18" Pans • No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Pans • No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Pans • No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Sheet Pans (chrome rod type, equips 1/2 section) • Universal Type Tray Slides To Accommodate Either (1) 18" x 26" or (2) 14" x 18", or (2) 12" x 20" Pans • Additional Wire Shelves or Optional Stainless Steel Shelves • Locking Hasps (padlocks supplied by others) • Optional 220/50/1 or 208/115/60/1 Voltages • Kool Klad Exterior Laminate Decor • Set of Four (4) 4-5/8" or 6" High Casters In Lieu of Legs • Other Support Options: 4-1/2" High Base or 6" High Kickplate • Remote Applications (see form TR35837 for more details) • Remote For Use With 20°F Glycol System • Clear Glass Door(s) In Place Of One Or More Solid Door(s) • Two Year Service/Labor Warranty Available

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners. Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening. Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

Standard interior arrangements include three (3) wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory

The easy to use water resistant INTELA-TRAUL® microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption

Both a one year parts and labor warranty and a five year compressor warranty (self-contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL® control is warranted by a two year parts and labor warranty.

Traulsen AHT132W-FHS 29.88'' 24.2 cu. ft. Top Mounted 1 Section Solid Door Reach-In Refrigerator

Name: Traulsen AHT132W-FHS 29.88'' 24.2 cu. ft. Top Mounted 1 Section Solid Door Reach-In Refrigerator
Brand: Traulsen
SKU: AHT132W-FHS
Price: 13683.29 USD
Availability: InStock

MPN#: AHT132W-FHS

Traulsen AHT132W-FHS 29.88'' 24.2 cu. ft. Top Mounted 1 Section Solid Door Reach-In Refrigerator

Free Freight?

Quick Ship

$13,683.29

Contact us for your price

Call 1 (800) 555-0666
Mon-Fri 9AM-8PM, Sun 12-6PM ET

Why don't we show the price for this item?

Product Protection

Starting at

2023 model, meets the newest EPA and DOE codes.
Usually ships in 4-6 weeks
NOTE! Requires remote refrigeration system (not included)

View all Traulsen Reach-In Refrigerators

Traulsen AHT132W-FHS Specifications

Refrigerator Capacity	24.2 cu. ft.
Door Size	Full
Hinge Location	Left
Half Doors	No
Construction	Stainless Steel and Aluminum
Brand	Traulsen
Refrigerant Type	R-134A
Number of Doors	1
Split Doors	No
Certifications	ETL
Controlled Humidity	Yes
Interior Finish	Aluminum
Control Type	Microprocessor
Type	Reach In
Capacity	11 - 30 cu. ft.
Compressor Location	Top Mounted
Door Type	Solid
Material	Aluminium
Sections	1
Temperature Range	34 - 38 Degrees F
Voltage	115 Volts
Wattage	1,500 Watts
Width (in)	29.88
Height (in)	83.25
Depth (in)	35
Weight	380

Additional Information on Traulsen AHT132W-FHS

warrantysheet.pdf

quickstartguide.pdf

accessorykits.pdf

exteriorlaminates.pdf

sellsheet.pdf

remotemodels.pdf

traulsensmartconnect.pdf

shippingdimensionsproductweights.pdf

ownersmanual.pdf

trayracks.pdf

traulsen-aht132w-fhsspecsheet.pdf

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Traulsen AHT132W-FHS Certifications

ETL

The ETL Mark is proof of product compliance to North American safety standards.

ETL-Sanitation

This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.

Features
Refrigeration System:	A top mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F
Standard Product Features:	• R-Series: Stainless Steel Exterior & Interior • A-Series: Stainless Steel Exterior/Anodized Aluminum Interior • INTELA-TRAUL® Microprocessor Control System • Balanced, Self-Contained Refrigeration System Using R-134a • Scroll Blower Type Evaporator Fan • Biased Return Air Duct • Full or Half Length Stainless Steel Doors With Locks • Self-Closing Doors With Stay Open Feature At 120 Degrees • Guaranteed For Life Cam-Lift Hinges • Guaranteed For Life Horizontal Work Flow Door Handle • Standard Door Hinging: 132W = Right, 232W = Left/Right, 332W = Left/Right/Right (other hingings available) • Automatically Activated Incandescent Lights • Stainless Steel Breaker Caps • Three Adjustable Wire Shelves Per Section, Supported On Shelf Pins (installed at the factory) • Automatic Non-Electric Condensate Evaporator • Magnetic Snap-In Door Gaskets • Gasket Protecting Metal Door Liner • Controllable Anti-Condensate Door Perimeter Heaters • Thermostatic Expansion Valve Metering Device • Stainless Steel One-Piece Louver Assembly • 9' Cord & Plug Attached • Set of Four (4) 6" High Adjustable Stainless Steel Legs • One Year Parts And Labor Warranty • Two Year Control Warranty (parts and labor) • Five Year Compressor Warranty
Options & Accessories:	• Stainless Steel Finished Back With Rear Louvers • No. 1 Type Tray Slides To Accommodate either (1) 18" x 26" or (2) 14" x 18" Pans • No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Pans • No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Pans • No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Sheet Pans (chrome rod type, equips 1/2 section) • Universal Type Tray Slides To Accommodate Either (1) 18" x 26" or (2) 14" x 18", or (2) 12" x 20" Pans • Additional Wire Shelves or Optional Stainless Steel Shelves • Locking Hasps (padlocks supplied by others) • Optional 220/50/1 or 208/115/60/1 Voltages • Kool Klad Exterior Laminate Decor • Set of Four (4) 4-5/8" or 6" High Casters In Lieu of Legs • Other Support Options: 4-1/2" High Base or 6" High Kickplate • Remote Applications (see form TR35837 for more details) • Remote For Use With 20°F Glycol System • Clear Glass Door(s) In Place Of One Or More Solid Door(s) • Two Year Service/Labor Warranty Available
Construction, Hardware and Insulation:	Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners. Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening. Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
Interior:	Standard interior arrangements include three (3) wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory
Controller:	The easy to use water resistant INTELA-TRAUL® microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption
Warranties:	Both a one year parts and labor warranty and a five year compressor warranty (self-contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL® control is warranted by a two year parts and labor warranty.