Power Soak SS-W-208-1 Silver Soak Sink
MPN#: SS-W-208-1
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Free Freight?
Quick Ship
$10,610.60
Product Protection
Starting at
Description
Power Soak SS-W-208-1 Description
Silver Soak Sink, weld-in, 26.51" H, 11 gallon wash tank, 304 stainless steel, 14 gauge tank & rim, 3/4 HP, 208v/60/1-ph, NSF, ULSTANDARD SPECIFICATIONS
- Single drain included
- ¾ HP wash pump motor
- 11 gallon wash tank capacity
- SST removable drain screen
- Uses standard pre-soak chemical
- (2) stainless steel silverware baskets included
- Silver Soak holds one silverware basket when operating
- Silverware basket holds approximately 250 pieces of silverware
- 304 stainless steel construction with 14 gauge tank, legs, and rim
- Wash pump to recirculate wash water at 600 gallons per minute flow rate
- Wash tank shall be 15.4” square with raw edges to be welded into SST tabling
- System conforms to ANSI/NSF Standard 2 with all welds to be heliarc (TIG) welds
- Will de-tarnish silver plate with proper pre-soak chemical and aluminum bar (bar by others)
- Wash tank temperature to maintain 114 degrees when filled with warm water and running with no wash tank heater
- PS-50 Single Pistol grip On/Off mechanical Start/Stop
- Meets UL 50, category 4X specifications
- Mounting bracket and mounting studs for control panel included. Enables easy mounting of control panel to wall, dish table or wash tank.
ELECTRICAL
- 208V/60/1, 4.8 Amps
- 230V/60/1. 5.2 Amps
PLUMBING
- ½” single handle faucet “hot only” included
- 1 ½” inside diameter ball valve drain provided
WARRANTY
- Three years parts and labor warranty
ORIGIN OF MANUFACTURE
- Designed and manufactured in the United States.
OPTIONAL ACCESSORIES
- Splash guard
- Additional silverware baskets
Options
Q & A
Power Soak SS-W-208-1 Specifications
| Brand | Power Soak |
|---|---|
| Certifications | NSF |
| Gauge | 14 Gauge |
| Width (in) | 15.40 |
| Height (in) | 26.51 |
| Depth (in) | 15.40 |
Additional Information on Power Soak SS-W-208-1
Power Soak SS-W-208-1 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
Items Related to Power Soak SS-W-208-1
Power Wash Sinks 12 products
