Power Soak PPA2B-66L-208-1 Power Prep Advanced System
MPN#: PPA2B-66L-208-1
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Free Freight?
Quick Ship
$23,321.06
Product Protection
Starting at
Description
Power Soak PPA2B-66L-208-1 Description
Power Prep Advanced System, 66"W x 30"D with 18"W x 24-3/4"D (front to back) wash sink, removable wash pump intake, removable was jet channel & reverse flushing system, 2-bay with flexible tank divider, (1) removal basket, (1) filter assembly, hemmed endsplash, squared channel rim, 9-1/2"H backsplash, ball drain, NSF certified for washing uncut, skin-on produce, 208v/60/1-phSTANDARD SPECIFICATIONS
- Flow guides
- Hemmed end splash
- 18” Solid drain board
- 1-1/2” Ball drain valve
- 30” Clean drain board
- 1/2” faucet with pre-rinse
- Removable wash jet channel
- Wash tank available as 2 bay only
- Removable wash pump intake screen
- Left to right (L) or right to left (R) configurations
- Rear-exit stainless ball valve drain for 100% drainage
- High quality 1/2” faucet assembly with pre-rinse spray
- Custom configurations available, including tabling, shelving, and accessories
- 208-240V/60/1, 4.1 Amps, 115V/60/1, 8.4 Amps, or 220-240V/50/1, 4.8 Amps
- Modular design allows quick and easy access to: motor, pump and all major components
- Type 304 stainless steel construction throughout tanks, drain boards, splashes and channel rims (14 gauge)
- Three positional reverse flushing system of wash pump housing, wash pump impeller and wash pump manifold
- Stainless steel self-draining pump housing and impeller, all wetted parts of the pump assembly are stainless steel
- 3/4 HP heavy duty (TEFC) wash pump motors (high service factor) are provided with all stainless steel pump assemblies
- Patented wash flow design allows for washed produce to be automatically collected into the stainless steel unloading baskets
- Wash tanks supported by 1-5/8” stainless diameter legs with 1-1/4” stainless cross members and adjustable stainless steel bullet feet
- Low profile wash jets average every three inches along the back wall of wash tank above the wash tank intake with removable jet block - wash jets provide free flowing uniform wash action
- Wash tank to have ultra-high molecular weight polyethylene (UHMW) flexible tank dividers, (UHMW) wash tank bay flow guides, high density polyethylene (HDPE) rib system integrally connected with stainless steel rods
CONTROLS
- PS-50: Pistol Grip ON/OFF mechanical Start/Stop switch
WARRANTY
- Flow guides 1 year
- Three year parts and three year labor warranty from the date of shipping (USA only)
ORIGIN OF MANUFACTURE
- Designed and manufactured in the United States.
OPTIONAL ACCESSORIES
- Unload baskets
- Fry cutter basket
- Over and under shelves
- Strainer for unload basket
- Stainless steel backsplash extensions
Options
Q & A
Power Soak PPA2B-66L-208-1 Specifications
Brand | Power Soak |
---|---|
Certifications | NSF |
Width (in) | 66.00 |
Height (in) | 43.50 |
Depth (in) | 30.00 |
Additional Information on Power Soak PPA2B-66L-208-1
Power Soak PPA2B-66L-208-1 Certifications

NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Items Related to Power Soak PPA2B-66L-208-1
Power Wash Sinks 12 products