Nor-Lake KODB614-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Outdoor +35°F Cooler, 6' x 14' x 6'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, membrane roof, CPB075PC-E-0, R290 Capsule Pak ECO Refrigeration, 115v/60/1-ph

If you need to rapidly expand your business’ bulk refrigeration storage capabilities but you’ve simply run out of indoor floor space, an outdoor walk-in unit like the Nor-Lake KODB614-C 6' x 14' x 6'-7" H Kold Locker is one of your only options. The inside of this walk-in unit offers 420 cu. ft. of refrigerated space.

The 4” thick panels that make up this cooler are made from 26 gauge steel encasing foamed-in-place insulation to achieve an R-value of 25, Both sides of the 25 gauge steel feature an embossed stucco finish for corrosion resistance. The panels have male and female rails that mate together tightly and are secured by foamed-in-place cam locking fasteners. Around the outer perimeter, a continuous panel gasket ensures an airtight seal without cuts or breaks around corners. The edge caps on the ceiling and floor panels are not overlapped or mechanically fastened, instead, they are foamed-in-place so they don’t come loose.

The door has a stepped profile to prevent airflow to keep the heat out. The standard door is 26” wide allowing secure access into the walk-in. Normally the upgraded 30” wide door kit with a stainless steel kick plate costs an additional $250, however, you can get it today at no extra cost. The door is mounted on two cam-lift hinges that can be installed on the left or right of the unit. The hinges are field-adjustable to adjust how the door hangs for smooth opening and closing and can be locked in with a set screw. A spring-actuated door closer is included to make sure the door is never left ajar. 

The door comes pre-installed in a 4’ wide panel section as a single unit complete with a perimeter heating wire (replaceable), A vapor proof LED lighting fixture controlled by a switch that also activates an external pilot light, magnetic stainless steel trim, and a digital thermometer. Everything inside is kept secure by an NL 9800 deadbolt locking handle that can also be locked with a more secure padlock. A safety release inside the walk-in prevents workers from getting trapped.

A temperature between 35°F and 38°F is efficiently maintained by the ceiling-mounted RCPB075JC-E-4-EV Capsule Pak Refrigeration System that produces 5812 BTU/hr of heat rejection. The refrigeration system is controlled by the Enviro-Control™ electronic control system which sets the temperature, defrost timer, and can be used to manually start a defrost cycle. Outdoor models come with metal trim to be used for flashing the membrane roof material to the side of panels. The roof is protected from the weather with a 35 mill white membrane roof material that requires no seaming or gluing. Trim is secured to wall panels with self-drilling and tappingTEK screws

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)